21 June 2023 in Advanced Functional Materials
Additively manufactured flexible and high‐performance piezoelectric devices are highly desirable for sensing and energy harvesting of 3D conformal structures. Herein, the study reports a significantly enhanced piezoelectricity in polyvinylidene fluoride (PVDF) achieved through the in situ dipole alignment of PVDF within PVDF‐2D molybdenum disulfide (2D MoS2) composite by 3D printing. The shear stress‐induced dipole poling of PVDF and 2D MoS2 alignment are harnessed during 3D printing to boost piezoelectricity without requiring a post‐poling process. The results show a remarkable, more than the eight‐fold increment in the piezoelectric coefficient (d33) for 3D printed PVDF‐8wt.% MoS2 composite over cast neat PVDF. The underlying mechanism of piezoelectric property enhancement is attributed to the increased volume fraction of β phase in PVDF, filler fraction, heterogeneous strain distribution around PVDF‐MoS2 interfaces, and strain transfer to the nanofillers as confirmed by microstructural analysis and finite element simulation. These results provide a promising route to design and fabricate high‐performance 3D piezoelectric devices via 3D printing for next‐generation sensors and mechanical–electronic conformal devices.
19 September 2024 in ACS Applied Nano Materials
6 January 2025 in ACS Nano
3 June 2025 in ACS Applied Materials & Interfaces
27 April 2026 in ACS Applied Materials & Interfaces
AHAbdel Rahman Abdul Hadi
7 October 2026 in Advanced Functional Materials
Two‐dimensional transition metal dichalcogenides (2D TMDs) offer atomically thin, phase‐tunable platforms to obtain energy‐efficient neuromorphic devices. However, high contact resistance severely limits device performance by narrowing the memory window, increasing power consumption, and compromising long‐term reliability. To address these challenges, semi‐metallic bismuth (Bi) is employed as a metal electrode. The Bi‐contact configuration shows significantly reduced contact resistance, arising from electron doping at the MoS 2 –Bi interface, as confirmed by systematic I–V characterization, Raman, and XPS analysis. After lithiation, the Bi‐contact MoS 2 device demonstrates pronounced synaptic performance enhancement, achieving enhanced linearity and symmetry in synaptic weight modulation along with a high I on /I off ratio. Such synaptic memory modulation is attributed to ion‐induced localized phase change in the MoS 2 structure. Moreover, our Bi‐contact device achieves nanosecond switching speed with ultra‐low power consumption of 5.4 fJ/µm per event, along with 97% pattern recognition accuracy, outperforming the performance of conventional metal contacts. Localized phase modulation driven by efficient Li‐ion migration in an ohmic contact MoS 2 enables high‐accuracy synaptic memory operation with ultra‐low power consumption, demonstrating the viability of this approach for neuromorphic computing applications.