Freshwater scarcity is a globally significant challenge threatening the development of human society. Sorption-based atmospheric water harvesting offers an appealing way to solve this challenge by extracting clean water from the air. However, the weak ability of sorbents to capture water from dry air and the low water productivity of devices are two long-standing bottlenecks for realizing efficient atmospheric water harvesting. Here, we report a vertically aligned nanocomposite sorbent, LiCl@rGO–SA, by confining lithium chloride (LiCl) in a reduced graphene oxide (rGO) and sodium alginate (SA) matrix. The sorbent shows high water uptake, as high as thrice its weight, by integrating the chemisorption of LiCl, deliquescence of monohydrate LiCl·H2O, and absorption of LiCl aqueous solution. Moreover, LiCl@rGO–SA exhibits fast sorption–desorption kinetics enabled by the vertically aligned and hierarchical pores of the rGO–SA matrix as water vapor transfer channels. We further engineered a scalable solar-driven rapid-cycling continuous atmospheric water harvester with synergetic heat and mass transfer enhancement. The water harvester using LiCl@rGO–SA realized eight continuous water capture-collection cycles per day and ultrahigh water productivity up to 2120 mLwater kgsorbent−1 day−1 from dry air without any other energy consumption. Our demonstration of the high-performance nanocomposite sorbent and scalable atmospheric water harvester offers a low-cost and promising strategy for efficiently extracting water from the air.
3 September 2020 in Journal of Materials Chemistry A
Phase change materials (PCMs) have been widely used for passive thermal management and energy storage due to the high latent heat capacity near phase transition points. However, the low thermal conductivity and leakage issue are two long-standing bottlenecks in PCM-based heat-related applications. Although the state of the art can address one or both of these issues by synthesizing phase change composites (PCCs), it remains challenging to achieve high-performance PCCs with simultaneously superior thermal and mechanical properties and phase change behaviors. In this work, a new method is reported to prepare highly thermally conductive, flexible and leakage-proof PCCs by constructing dual polymer and graphite nanoplatelet networks as the functional matrix of PCMs. In the composites, paraffin wax serves as the PCM, the macromolecular olefin block copolymer (OBC) forms a cross-linked polymer network to enclose the molten PCM and endow the composite film with flexibility, and expanded graphite (EG) with a long-chain structure forms an aligned and interconnected graphite nanoplatelet percolation network to enable the high thermal conductivity of PCCs. The radial thermal conductivities reach 4.2–32.8 W m−1 K−1 at EG loadings of 5–40 wt%. The resultant flexible composite film shows efficient and reliable thermal management performance by lowering the working temperature of a commercial lithium-ion battery by more than 12 °C at high discharge rates. Our work provides an efficient and cost-effective route to synthesizing high-performance PCCs for various heat-related applications including the thermal harvesting of renewable energy, building energy management, thermal management of electronics, etc.
Phase change materials (PCMs) offer great potential for realizing zero-energy thermal management due to superior thermal storage and stable phase-change temperatures. However, liquid leakage and solid rigidity of PCMs are long-standing challenges for PCM-based wearable thermal regulation. Here, we report a facile and cost-effective chemical cross-linking strategy to develop ultraflexible polymer-based phase change composites with a dual 3D crosslinked network of olefin block copolymers (OBC) and styrene-ethylene-butylene-styrene (SEBS) in paraffin wax (PW). The C-C bond-enhanced OBC-SEBS networks synergistically improve the mechanical, thermal, and leakage-proof properties of PW@OBC-SEBS. Notably, the proposed peroxide-initiated chemical cross-linking method overcomes the limitations of conventional physical blending methods and thus can be applicable across diverse polymer matrices. We further demonstrate a portable and flexible PW@OBC-SEBS module that maintains a comfortable temperature range of 39–42 °C for personal thermotherapy. Our work provides a promising route to fabricate scalable polymer-based phase change composite for wearable thermal management.