30 January 2022 in Transportation Infrastructure Geotechnology
9 December 2025 in Geotechnical and Geological Engineering
1 March 2011 in Nondestructive Testing and Evaluation
Probability of detection (PoD) studies are broadly used to determine the reliability of specific nondestructive inspection procedures, as well as to provide data for damage tolerance life estimations and calculation of inspection intervals for critical components. They require inspections on a large set of samples, a fact that makes these statistical assessments time- and cost-consuming. Physics-based numerical simulations of nondestructive testing inspections could be used as a cost-effective alternative to empirical investigations. They realistically predict the inspection outputs as functions of the input characteristics related to the test piece, transducer and instrument settings, which are subsequently used to partially substitute and/or complement inspection data in PoD analysis. This work focuses on the numerical modelling aspects of eddy current testing for the bolt hole inspections of wing box structures typical of the Lockheed Martin C-130 Hercules and P-3 Orion aircraft, found in the air force inventory of many countries. Boundary element-based numerical modelling software was employed to predict the eddy current signal responses when varying inspection parameters related to probe characteristics, crack geometry and test piece properties. Two demonstrator exercises were used for eddy current signal prediction when lowering the driver probe frequency and changing the material's electrical conductivity, followed by subsequent discussions and examination of the implications on using simulated data in the PoD analysis. Despite some simplifying assumptions, the modelled eddy current signals were found to provide similar results to the actual inspections. It is concluded that physics-based numerical simulations have the potential to partially substitute or complement inspection data required for PoD studies, reducing the cost, time, effort and resources necessary for a full empirical PoD assessment.
1 October 2025 in International Journal of Geomechanics
9 March 2026 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
This study investigates the dynamic behaviour and mitigation strategies for railway bridge transition zones, which are critical regions prone to accelerated track degradation due to abrupt changes in substructure stiffness and damping. Such zones experience heightened train impact forces, leading to increased vibrations and differential settlements that compromise safety and necessitate frequent maintenance. Through the development and validation of detailed 3D numerical models calibrated with field data, this research examines the influence of train speed, axle load, and transit direction on track stability under high-speed and heavy freight conditions. The findings reveal that increasing train speed and axle load significantly exacerbate vibrations and track settlements, elevating derailment risks. Notably, the application of micropiles beneath the track at approach zones demonstrates a substantial reduction in differential settlements up to 57%, surpassing many existing mitigation techniques. Additionally, optimising micropile dimensions and spacing effectively diminishes dynamic forces at the track-bridge interface, thereby enhancing the overall stability and safety of high-speed and heavy freight railway operations across transition zones.