The paper deals with the development of a graphene-containing sorbent material based on activated rapeseed biochar. The physicochemical properties of the sorbent and features of its morphological structure were determined. The nanocomposite was found to have amorphous properties with a graphene-like structure. The morphological analysis confirmed the formation of internal carbon framework and external three-dimensional multilayer graphene structure, which is excellent for mass transfer between pollutants and adsorbent surface. The research also aimed to determine the important parameters of sorption of organic compounds, i.e. synthetic dyes Congo Red (CR) and Malachite Green (MG), on the developed material from aqueous solutions in a limited volume. According to the kinetic studies, the experimental sorption capacity of the material on MG was 1860 mg⋅g–1 (sorption time – 60 min) and 642 mg⋅g–1 on CR (sorption time – 15 min). The theoretical maximum adsorption capacity of the sorbent calculated by the Langmuir model reached values of 769.23 mg⋅g–1 for CR and 3333.33 mg⋅g–1 for MG. It is found that the extraction of dye molecules is controlled by the second-order reaction according to the pseudo-second-order model and proceeds mainly by a mixed-diffusion mechanism. The activation energy has a value of 0.01 kJ⋅mol–1 for CR molecules and 0.02 kJ⋅mol–1 for MG, confirming the physical mechanism of dye adsorption. The high efficiency of adsorption of organic dyes on graphene-containing sorption material based on activated rapeseed biochar was demonstrated, indicating the feasibility of its practical application in wastewater treatment.
27 June 2025 in Image Journal of Advanced Materials and Technologies
This study synthesized nanocomposite activated carbon (AC) from plant raw materials (peach production waste), modified with carbon nanotubes (CNTs). The first stage in obtaining all samples involved hydrothermal carbonization (HTC) of peach pomace in an aqueous environment with the addition of a specific amount of CNTs, after which the biomass was gradually carbonized and activated using an alkali (KOH) in an inert atmosphere. The aim of the study was to evaluate the effect of CNTs on the structure and physicochemical and functional properties of the nanocomposite AC. It was established that the carbon obtained from the initial mixture containing 0.05 wt. % CNTs showed a specific surface area according to the BET model of 2876 m2⋅g–1 and a total pore volume of 1.643 cm3⋅g–1. It is presumed that the interaction of the biomass with the nanotubes occurs at sites on the surfaces of the samples after HTC, where functional groups are located. The sample with 0.05 wt. % CNTs exhibited minimal ID/IG and d100 values, indicating a higher order of the carbon structure. For all carbons, the sorption capacity relative to synthetic dyes – malachite green (MG) and Congo red (CR) – was determined. A general correlation was found between the changes in the ID/IG and d100 values and the activity of the AC samples. The AC with 0.05 wt. % CNTs demonstrated the highest capacity for both dyes in static mode: 2987 mg⋅g–1 for MG and 1201 mg⋅g–1 for CR, respectively. For this particular sample, an assessment of the sorption kinetics was conducted.