1 September 2020 in Physics of Fluids
The piston mode fluid resonance in the narrow gap between a moored floating body and a bottom-mounted vertical wall is numerically investigated based on a two-dimensional potential flow model and viscous numerical simulations. This study focuses on understanding the effect of mooring stiffness on the coupling dynamics of the gap resonance and the sway or heave motion of the floating body in regular waves. Numerical studies show that the resonant wave amplitude in the gap is reduced by the sway and heave motions. The reduction is highly dependent on the mooring stiffness. Two resonant frequencies are confirmed, and both increase with the mooring stiffness. Different modes of motions are identified in terms of the phase difference between the oscillatory motions of the gap flow and the floating body. Higher harmonic components of responses are found for the specific mooring stiffness. The performance of potential flow models in predicting resonant responses is revisited based on the understanding that the overall damping effect consists of two parts: (1) radiation damping and (2) viscous dissipation. It is confirmed that a potential model is also able to produce reasonable predictions as radiation damping plays a dominant role, for example, at the second resonant frequencies of coupling the gap resonance with the sway motion. Otherwise, as viscous dissipation dominates radiation damping, noticeable over-predictions by a potential model occur as recognized before, for example, the present results at the second peak response of gap resonance with the heave motion. The relative viscous dissipation is quantified with the reflection coefficient of viscous numerical results, while the radiation damping is quantified based on a specially designed radiation potential model with inputs of viscous numerical solutions.
1 June 2021 in Physics of Fluids
In this paper, the damping of wave-induced resonant oscillations of water column in the gap between two fixed boxes is investigated through physical model testing. A pair of rectangular fins with different geometries is attached to the sidewalls of the gap to suppress the resonant response. This study is an extension to Tan et al. [“A viscous damping model for piston mode resonance,” J. Fluid Mech. 871, 510–533 (2019)], where the damping of wave resonance in a plain gap without fins was investigated. We found that (1) the resonant wave height in the gap decreased substantially with the increasing fin thickness, but was not very sensitive to the variation of the fin height. This observation suggests that the fin thickness has a more significant influence on the damping of oscillations than the fin height; (2) the resonant frequency decreased as the thickness of the fins was enlarged, which is primarily attributable to the decrease in the natural frequency (due to increasing added mass) and partly ascribed to the increase in viscous damping. The viscous dissipation was found to be approximately 3–10 times larger than the radiation energy and explains the well-known over-estimations of inviscid potential solution in resonant amplitude. A modified potential flow model with a damping mechanism was employed to predict the wave response in the gap, wave reflections, and transmissions. Reasonable agreements were obtained between the experimental results and the modified potential flow solutions with respect to amplitude, whereas a difference of 6%–14% in resonant frequency was observed. This difference is ascribed to the effects of flow separation on the added mass of fins, which cannot be fully captured by modified potential flow models. In addition to the present geometries, the local loss coefficients for other appendage configurations were also calibrated based on the available experimental and computational fluid dynamics data in the literature.
1 January 2009 in Journal of the Japan Society of Naval Architects and Ocean Engineers
1 January 2014 in Journal of Japan Society of Civil Engineers, Ser. B3 (Ocean Engineering)