In the present research article we explore the synthesis method and adsorption capability of ZnFe oxides nanocomposites by using Pb as dopant. A conventional and simple batch adsorption method is selected and optimized. Pb@ZnFe2O4 NCs were fabricated by facile method i.e. co-precipitation method and characterized by FESEM, XRD, IR, EDX. The removal of dye has monitored by UV method. An outstanding result is obtained as adsorption efficiency of 1042 mg g-1 shows more significant performance than currently available bench-mark adsorbents. The optimized parameters pH 7.1, Adsorbent Mass: 50 mg, Initial Dye Concentration: 150 mg/l and Agitation Time: 90 min results in 96.49 % removal of CR (Congo red) dye. A CCD (central composite design) is applied to evaluate the role of adsorption variables. Based on its excellent performance, cost effectiveness, facile fabrication and large surface area, the Pb@ZnFe2O4 has considerable potential for the manufacture of cost effective and efficient adsorbents for environmental applications.
1 October 2014 in Sensors and Actuators B: Chemical
Recently composite metal oxides have gained significant attention to be used as adsorbent because of their synergetic effects. Particularly Manganese containing composite oxides are useful for removal of inorganic oxyacids such as phosphate or arsenate. In present study fabrication of Mn-Zn-Ti Oxide adsorbent for phosphate removal carried out via co precipitation method. Surface properties deduced by TEM, FESEM, EDAX and XRD, revealed nanosized composite material has a porous nature constitute of alloy type mixing of the metals. Size of the nanocomposite found to be as small as 6 nm. Adsorption capacity for phosphate estimated at different pH, time and adsorbent dose by batch mode. In addition desorption properties and thermodynamic study also carried out. Several isotherms and kinetic models applied to observe adsorption properties of the Mn-Zn-Ti Oxide nanocomposite. Adsorption capacity found to be 151 mg/g at pH 6, time 90 min, adsorbent dose 0.20 g/L and phosphate concentration of 200 mg/L. Adsorption data fitted to second order kinetics and Freundlich isotherm. Formation of complex between nanocomposite and phosphate predicted from FTIR and supported by pH kinetic and isotherm studies. Desorption and reusability found to be well maintained over five cycles. GRAPHICAL ABSTRACT
Fe-Mn-Zn oxide trimetal alloy nanocomposite (FMZONC) fabricated and surface properties of the composite material revealed via several characterization methods. Porous nature and alloy type mixing of metals deduced from transmission electron microscopy analysis. Field emission scanning electron microscopy image revealed composite material is of size between 7 and 16 nm. The adsorption properties investigated through isotherm and kinetic experiments. In addition, pH effects and desorption properties were also studied. Maximum adsorption capacity (q max) 149 mg/g for phosphate removal observed at pH 6 and 0.20 g/L of adsorbent. Chemical interaction between metal hydroxide and phosphate elaborated from Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS).