This work presents a polarization-maintaining (PM) highly nonlinear Ge 20 As 20 Se 15 Te 45 chalcogenide photonic crystal fiber (PCF) designed for broadband mid-infrared (MIR) supercontinuum (SC) generation. Through optimization of the PM-PCF’s geometrical parameters, the proposed fiber exhibits ultra-flat normal dispersion properties for the fundamental mode with the x -polarization component. In contrast, the y -polarization fundamental mode, the proposed PCF provides flat anomalous dispersion properties at a pump wavelength of 9.8 μ m. The effects of input energy and pulse width on the spectral profiles and coherence properties of the SC spectrum are investigated. The result is a highly coherent SC extending from 4.98 µ m to 15.08 µ m (a bandwidth of 10.1 µ m) and from 2.9 µ m to 25.2 µ m (a bandwidth of 22.45 µ m) in the MIR region when a pump pulse with a wavelength of 9.8 μ m is used for the designed fiber with the x -polarization and y -polarization factors, respectively. The proposed PM-PCF-based SC source shows potential as a candidate for nonlinear applications, including frequency metrology, optical sensing, and optical tomography.
This study investigates how the structural parameters of suspended-core photonic crystal fibers (SC-PCFs) influence their effective refractive index (neff), focusing on designs based on arsenic sulfide (As₂S₃) with carbon disulfide (CS₂)-filled air holes. As₂S₃ provides a high nonlinear refractive index and wide infrared transparency, while CS₂ infiltration enables enhanced optical control due to its high refractive index. Using Lumerical Mode Solutions, numerical simulations were conducted for TE₀₀ and TE₁₀₀ modes across the wavelength range from 2 to 5 μm, with structure ratios (w/ ) varying from 0.35 to 0.85. Results show that neff increases with slot width and reaches 2.2251 at 2150 nm for CS₂-filled designs. Compared to air-filled fibers, CS₂ infiltration improves refractive index control and optical confinement. These results provides quantitative design guidance for optimizing modal confinement and birefringence in SC-PCFs targeting nonlinear and polarization-sensitive applications in the mid-infrared regime.
In this paper, we investigate a photonic crystal fiber (PCF) of Ge23Sb7S70 chalcogenide with five air-hole rings arranged in a regular hexagonal lattice. Using simulations and numerical analyses, we investigated the influence of structural parameters on the optical properties of the PCF. The results show that controlling the lattice constant (Λ) and the filling factor (f = d/Λ) in the cladding allows precise tuning of the dispersion and confinement loss properties over a wide wavelength range. Furthermore, we propose two optimized structures, #F1 (Λ = 2.0 μm, f = 0.35) and # F2 (Λ = 3.0 μm, f = 0.35), which are designed to operate in the all-normal dispersion region and the anomalous dispersion region, respectively, making them promising candidates for super-continuum generation applications.