Automated object manipulation is subject to various constraints, which can be affected by means of suitable motion strategies. With respect to an efficient motion design corresponding strategies are often referred to the manipulator’s energy consumption and performance considering its specified kinematic and dynamic characteristics. Supposing that various automated manufacturing processes use industrial robots and manipulators, an efficient motion design is able to reduce operating costs and CO2 emissions. This contribution is devoted to the simulation based energy optimization of robot motions, considering both the geometric path and the motion law of specific trajectories. In this context, two different levels of trajectory optimization are suggested, exposing the displacement of geometric nodes on the one hand and the variation of velocities and accelerations on the other hand. Due to its simple kinematic structure, the analyses exemplarily are focused on different trajectories of the manipulator Re-PlaLink, a five-bar linkage, which is capable of energy recuperation during regenerative mode. Accordingly, results show a significant energy reduction, establishing high potentials for an increased efficiency of industrial robots.
Industrial robots performing pick and place operations account for a major part of the energy consumption in packaging and assembling industry. Because of increasing energy prices and the wish for sustainable technologies, methods to reduce the energy consumption of robot manipulators gain in importance. The repetitive character of pick and place operations allows to reduce the energy consumption of the manipulator by adding elastic elements in the joints of the manipulator and utilising the system's dynamics. To use this method a tailored path planning algorithm is needed, which will be presented in this paper, on the example of a five-bar linkage parallel manipulator. The proposed algorithm is based on the optimal control theory. The solution of the resulting boundary value problem is conducted within MATLAB. By simulations it will be shown that this method allows to reduce the energy consumption by up to 84 %.
Nowadays one of the key aspects in the study and design of industrial robots is the energy efficiency. These robots are not only expected to perform the task accurately and rapidly but also to minimize the energy consumption. One method that has shown high potential in reducing the energy consumption of pick-and-place robots is the addition of elastic elements and the use of the natural motion of the system. In this method, the system is designed such that its free-vibration response matches the task frequency and amplitude of oscillation. Consequently, after releasing the robot from the starting position, it moves towards the end position, where the end-effector stops at the given time for the task. In this paper, we propose a method for finding the appropriate springs and the resulting motion of the mechanism using multi-body simulation and a numerical optimization. This method can be applied to different robots and springs configurations, and requires no formulation of the equations of motion.