1 February 2022 in Defence Technology
4 June 2018 in Journal of Materials Science
23 March 2022 in Journal of Applied Physics
The shock compression of porous nickel from nanosized particles nNi was studied at a pressure range of 4–61 GPa. The average size of the nNi particles was 50 nm, and the porosity of the samples was 50%. Plane shock waves in the samples were generated by the impact of aluminum plates accelerated to velocities ranging from 0.8 to 5 km/s. Laser interferometry was used to monitor particle velocity histories at the interface between the samples and water or LiF windows. The data obtained at pressures below 8 GPa showed a complex shock wave profile with the formation of an elastic precursor wave. The shock Hugoniot and data on the expansion isentropes were obtained. The Hugoniot of nanosized nNi coincided within the experimental errors with the Hugoniot of micron-sized nickel. The Hugoniot calculated on the basis of the equation of state for porous nickel was in good agreement with that of experimental data. It has been established that in the middle pressure range (20–35 GPa), the expansion isentropes in the “pressure–particle velocity” coordinates become noticeably flatter with a significant increase in the particle velocity. The reason for this phenomenon is still unclear. An assumption was made about the onset of particle melting upon reaching pressures above 15 GPa.
1 July 2017 in Combustion, Explosion, and Shock Waves
The detonation properties of mechanically activated mixtures of ammonium perchlorate and aluminum were studied. The deflagration-to-detonation transition for low-density charges was investigated. Dependences of the detonation velocity of pressed charges with different types of aluminum on the activation time, density, and diameter of the charges were obtained. For compositions with nanosized aluminum, it is was found that the detonation velocity depends nonmonotonically on the inverse charge diameter and remains almost unchanged in a certain range of charge diameters. It is shown that the joint use of mechanical activation and nanosized components of the composite explosive significantly increases the detonability, reduces the critical diameter, and shifts the maximum of the detonation velocity as a function of density to higher charge densities.
1 November 2013 in Combustion, Explosion, and Shock Waves
The brightness temperature and pressure profiles of the detonation products of pressed charges of benzotrifuroxane were determined by a pyrometric method, and the heat of explosion and propellant...
1 July 2015 in Russian Journal of Physical Chemistry B
The properties of mechanoactivated energetic composites based on aluminum and potassium perchlorate with high rates of self-sustaining chemical reactions under conditions of combustion and detonation...