1 January 2014 in Mathematical Problems in Engineering
Aiming at the differences of vehicle chassis key subsystems influence on vehicle handling stability and effective acting regions, comprehensive considering of the nonlinear characteristic of the tires and the dynamic coupling among suspension, steering, and braking subsystems in vehicle chassis, the 14‐DOF full vehicle model is built. Based on the control characteristic local optimum of each subsystem, multilevel hierarchical control theory is adopted and the vehicle stability coordinated control system including organization, coordination, and execution level is established. Using sliding mode control theory and the inverse tire model, the generalized target forces and moments from organization level are translated into the tire sideslip angle and slip ratio. And then, based on the principle of functional allocation, the control functions of each subsystem are coordinated and the function decoupling of vehicle chassis complex system is realized. The Matlab/Simulink platform is used and the full vehicle stability coordinated control system is simulated. The results show that the full vehicle coordinated control system based on multilevel hierarchical control theory can improve the vehicle stability preferably than the subsystem combined control and uncontrolled system.
12 April 2022 in Measurement Science and Technology
A novel method for the lateral and impact force measurement of shock absorbers using a three-component column-type sensor is proposed in this study. The strain gauge configuration and the bridge connection were designed, and the outputs of each designed measuring bridge under both alignment and eccentric loading were theoretically analyzed. Simulations and experimental tests were conducted to validate the measuring bridge output of the theoretical analysis; the results from the theoretical analysis, simulation, and experiments agree well with one another. In accordance with the specifications put forth in the SAE J2570 standard, the designed sensor was calibrated to obtain its performance parameters and calibration coefficients, which were then applied to acquire the lateral and impact force of a shock absorber. The calibration results demonstrate that the maximum nonlinearity and hysteresis were 0.51% and 0.87% (full-scale), respectively, and the sensor had good linearity and weak coupling between dimensional characteristics.