This article proposed to build a system founded on metamaterial sensor antennas, which can be used to evaluate impurities in aqueous substances according to the quality of transmission between the sensor antennas. In order to do this, a dedicated setup with tests in several frequencies was deployed so as to monitor the behavior of transmission variation between sensors. These sensors are microstrip antennas with a ground plane of resonant cleaved metallic rings; the substrate functions as a metamaterial for the irradiating element. In this study, an analysis was made of transmission between the sensors, looking for variation in angles of incidence of signal and of distance between the antennas. The sensor was tested at various operating frequencies, as such 1.8 GHz, 2.4 GHz, 3.4 GHz and 4.1 GHz, resulting in different values of sensitivity. The prototypes were constructed and tested so as to analyze the dielectric effects of the impurities on NaCl and C2H4O2 substances. The research aims to use these control systems of impurities in industrial premises.
1 June 2019 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and of bioinspired frequency selective surfaces (FSSs) on fiberglass substrates for wireless communication systems. The new conductive ink is developed using synthesized nitrocellulose which, in ethyl acetate solution, works as a bonding agent and carrier for the formation of a conductive film. The load used in the fabrication process is silver metallic powder. Simulation and analysis are performed using Ansoft Designer and HFSS softwares. Microstrip antenna and FSS prototypes are fabricated and measured for comparison purpose. An agreement is observed between simulation and measurements results.