11 December 2018 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
This paper presents a novel six-degree-of-freedom (6-DOF) parallel platform that is used as the third mirror adjustment system of a large space telescope. In order to meet the design requirements of high precision, a large load–size ratio, and high stiffness in both the transverse and the vertical directions, the parallel platform is designed to be a 6-P-RR-R-RR structure via use of offset RR-joints. The inverse kinematics problem of the designed platform with offset RR-joints is much more complicated than that of a parallel platform with common universal joints owing to the presence of joint-dependent variables in the former problem. In this study, inverse kinematics of the designed parallel platform is mathematically modeled and the Newton–Raphson numerical iterative computation is performed. The accuracy and effectiveness of the proposed mathematical approach are verified by numerical co-simulations using MATLAB and ADAMS. The initial position of the platform is determined by a precision measuring arm. A test system is constructed, and then inverse kinematics solution, resolutions and adjusting steps accuracies of the platform are tested using grating length gauges. Motion strokes of the parallel mechanism are measured using laser tracker.
30 November 2020 in IET Intelligent Transport Systems
A parameter‐space‐based robust platooning controller for the event‐triggered heterogeneous platoon is presented. The novel heterogeneous platoon is established with different longitudinal vehicle dynamic and driving preferences and the event‐triggered communication scheme is designed to reduce the utilization of communication resources. To handle the stricter demand of the heterogeneous system and the disturbance caused by event‐triggered communication scheme, the parameter space approach is adopted to optimize the gains of a robust controller. The feasible region where internal stability and string stability are satisfied is then visualized in the parameters space, by extending the parameter space approach to the D‐stability and frequency response magnitude specifications. Subsequently, the robust controller, which combines the feedforward loop and feedback loop, is developed by selecting the gain from the feasible solution area. The simulation results of the event‐triggered heterogeneous platoon are presented and evaluated to verify the efficiency of this control algorithm. It is seen that the internal stability and string stability of the event‐triggered heterogeneous platoon are guaranteed by this robust controller. Furthermore, 89.7% of communication resources are saved by the application of event‐triggered communication scheme, while the following performance is also favourable during the highway fuel economy cycle.
20 January 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
A six degrees-of-freedom parallel platform in a 6-RR-RP-RR configuration with high accuracy, high stiffness and a large working stroke is studied for application to the sub-mirror adjustment system of a large-aperture telescope. To meet the performance requirements, the parallel platform adopts a self-centering and well-designed offset universal hinge. The two hinge axes of the offset hinge do not intersect but have a specific offset in space, which makes the kinematics more complex than that with a common universal hinge. Therefore, to solve this complex kinematics problem, this paper innovatively introduces the Denavit–Hartenberg (D-H) parameter method that is used for series mechanisms. The method has a simple modeling process, strong applicability and continuity, providing a new tool for the analysis and application of the parallel mechanisms. A kinematics model of the parallel platform can be constructed and solved using a numerical iteration method. The accuracy of the numerical kinematics solution is verified using a co-simulation method. This paper analyses the passive derivative motion and the leg length error is compensated. Finally, test studies of the motion resolution, the repetitive positioning accuracy, the motion stroke, the static stiffness of the legs, and the static stiffness and dynamic stiffness of the entire machine were also carried out to verify the platform’s performance.