In this processing study we systematically investigate the impact of lithium excess and dwell time on Ga-substituted LLZO (Li6.4Ga0.2La3Zr2O12). To draw a holistic picture of the underlying dependencies for maximum performance, we study the composition, phase formation, density and microstructure, especially with respect to the grain boundaries, in detail. For the first time, we show that Li-excess during synthesis and processing is not just unnecessary for LLZO:Ga, but that high amounts of Li excess can also prevent obtaining peak performance or increase energy and precursor consumption to a non-feasible level for industrial application. We show that the underlying mechanism is an intricate interplay between phase equilibria of different phases (tetragonal, cubic, Li–La–Ga), which have good conductivity and/or act as sintering aids (in low amounts) but are detrimental to electrochemical performance in large amounts. Based on this understanding, we developed a reproducible and robust processing route for LLZO:Ga, minimizing Li excess and dwell time while maintaining high conductivity in the final component. This can make the LLZO family more viable for application in high energy density all-solid-state batteries and provide a pathway for economic industrial processing.
In this work, the effects of dopant size and oxidation state on the structure and electrochemical performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) are investigated. It is shown that doping with boron (B) which has a small ionic radius and an oxidation state of 3+, leads to the formation of a boron oxide‐containing surface coating (probably Li 3 BO 3 ), mainly on the outer surface of the secondary particles. Due to this effect, boron only slightly affects the size of the primary particle and the initial capacity, but significantly improves the capacity retention. On the other hand, the dopant ruthenium (Ru) with a larger ionic radius and a higher oxidation state of 5+ can be stabilized within the secondary particles and does not experience a segregation to the outer agglomerate surface. However, the Ru dopant preferentially occupies incoherent grain boundary sites, resulting in smaller primary particle size and initial capacity than for the B‐doped and pristine NCM811. This work demonstrates that a small percentage of dopant (2 mol%) cannot significantly affect bulk properties, but it can strongly influence the surface and/or grain boundary properties of microstructure and thus the overall performance of cathode materials.