7 July 2023 in Science Advances
Robots typically interact with their environments via feedback loops consisting of electronic sensors, microcontrollers, and actuators, which can be bulky and complex. Researchers have sought new strategies for achieving autonomous sensing and control in next-generation soft robots. We describe here an electronics-free approach for autonomous control of soft robots, whose compositional and structural features embody the sensing, control, and actuation feedback loop of their soft bodies. Specifically, we design multiple modular control units that are regulated by responsive materials such as liquid crystal elastomers. These modules enable the robot to sense and respond to different external stimuli (light, heat, and solvents), causing autonomous changes to the robot’s trajectory. By combining multiple types of control modules, complex responses can be achieved, such as logical evaluations that require multiple events to occur in the environment before an action is performed. This framework for embodied control offers a new strategy toward autonomous soft robots that operate in uncertain or dynamic environments.
13 December 2025 in Communications Engineering
Buckling is a common failure mode in lattice structures, limiting their use in some applications. The tendency of a strut to buckle is related to the local nodal connectivity. In this work, we introduce a pneumatic actuation strategy to actively tune the mechanical behavior of lattice structures by locally reconfiguring their effective nodal connectivity. By selectively inflating pneumatic actuators embedded in the lattice into spatial patterns with varying levels of connectivity, we demonstrate a method to modulate mechanical properties, including stiffness and buckling response. The most reinforced pattern can lead to 121.6% improvement in buckling strength relative to the regular lattice itself. Additionally, the post-buckling behavior of pneumatically controlled lattices can be programmably tuned by varying the input air pressure signals. The pneumatically controlled lattices reduced the peak acceleration by 50.9%, demonstrating enhanced impact mitigation capability. These results show that pneumatic actuation provides a versatile approach to enhancing structural performance under both static and dynamic loading. Since this strategy does not rely on multi-material interfaces or specific cell topologies, it can be broadly applied to optimize a wide range of lattice architectures.
22 May 2026 in Journal of Intelligent Material Systems and Structures
This study presents a modular pneumatic actuator system for soft robotics, designed to improve reconfigurability, adaptability, and deployment efficiency. The system consists of a standardized and extensible set of functional modules, including elongation, bending, twisting, and stimuli-responsive modules, each systematically characterized by its pressure–deformation behavior. These modules can be (re)assembled according to task-specific requirements, enabling the rapid construction of soft robotic platforms with customized actuation strategies. We demonstrate the versatility of this approach through three representative systems: a bioinspired trunk-like robot, a soft crawling robot, and a reconfigurable three-fingered gripper. Each example highlights key advantages of modularity, such as structural adaptability, environmental responsiveness, and object-specific grasping. The results show that this strategy supports scalable, low-cost, and reusable actuator designs.