Relations for the principal values of the damage tensor based on data on the speeds of longitudinal and transverse waves are proposed. The relationship of acoustic anisotropy with the principal...
Acoustoelasticity approach is a method of non-destructive testing and it is based upon the theory of propagation of ultrasonic longitudinal and transverse waves of different polarization in solids. This approach is able to uniquely determine the value of the principal stress in the case of no plastic deformation. An elastoplastic material with hardening is taken and the problem of propagation of a plane acoustic wave in a homogeneous prismatic elastic-plastic body that is uniaxially prestressed in the direction perpendicular to the wave propagation direction is solved. The sound velocities for the transverse and longitudinal waves are obtained for different approximations in terms of the first and second order of smallness. A strong dependence of the velocities from the hardening factor and component of the deviatoric stress tensor was detected. The study provides a number of closed-form expressions required for solving the practical problem of technical diagnostics of structures exposing plasticity.
The surface effect of acoustic anisotropy in steel and aluminum industrial alloys was experimentally detected. Changes in the integral value of acoustic anisotropy in 10–15 times were observed after removing the surface layer with a thickness of 100 microns in steel specimens and 250 microns in aluminum specimens. The correlation between distributions of acoustic anisotropy and hydrogen concentrations in surface layer of specimens was found. It was suggested that the surface effect of acoustic anisotropy occurs due to the influence of microcrack systems localized in a surface layer of metal. This result can be used to improve existing approaches to estimating of corrosion damage, fatigue, mechanical stresses and plastic deformations of technical structures by using acoustic anisotropy.
The article is concerned with the possibilities of the application of the standard method for measuring acoustic anisotropy to the estimation of the degree of plastic deformation. Solutions to the problem of propagation of a sound wave in an isotropic elastic-plastic material are obtained and analyzed. The dependences of the velocity of longitudinal and transverse waves of different polarization on plastic strain are derived. It is shown theoretically and experimentally that the absolute value of the velocity of sound wave propagation has a monotonic dependence on the strain magnitude, while the value of the acoustic anisotropy demonstrates a nonlinear and non-monotonic dependence on the strain magnitude. The data obtained allow one to develop a methodology for assessing the magnitude of plastic strain based on the absolute values of pulse time delay measured by means of the standard industrial equipment developed for acoustic anisotropy.