We consider the thermodynamic and kinetic properties of Nickel as an example of transition metal in two-temperature state ( ,) produced by femtosecond laser heating. Our physical model includes essential processes induced in metals by ultrafast laser energy absorption. Specifically, the electron-ion collision frequency was obtained from recent high-temperature measurements of electrical conductivity and electron-electron screened Coulomb scattering was calculated by taking into account s-s and s-d collisions. In addition, chemical potential, energy, heat capacity, and pressure were obtained from first-principles density functional theory calculations. This model was implemented in two-temperature hydrodynamic code (2T-HD) and combined with molecular dynamics (MD) to determine strength of molten Ni at high strain rates under conditions of femtosecond laser ablation experiments. The simulated ablation threshold, which depends on material strength, was found to be in good agreement with our experimental measurements reported here. The combined 2T-HD/MD modeling explains the surprisingly high experimental energy density necessary to initiate ablation in Ni (the experimental crater depth in Ni is several times smaller than in Al and Au, while ablation threshold energies are similar).
1 August 2006 in Journal of Experimental and Theoretical Physics
The action of a subpicosecond laser pulse on a target made of an absorbing condensed substance is considered. The propagation of an electron heat conduction wave and the crystal lattice heating prior to the hydrodynamic expansion of the target are analyzed. In these initial interaction stages, a heated layer with a thickness of dT is formed at the target surface. The dependence of dT on the absorbed laser energy density F[J/cm2] is evaluated. The motion of ablated matter in the expansion stage is described using a numerical solution of the equations of gasdynamics and the results of molecular dynamics (MD) simulations. The MD simulations are performed using a large number (∼103) of parallel processors, which allows the number of model atoms to be increased up to a level (about 3.5 × 107) close to that encountered under real experimental conditions.
Ultrashort heating of substances converts them into the two-temperature (2T) state with hot electrons. The thickness of the heated layer rapidly increases into the depth of the metal in this state (by comparison with the thickness of the skin layer), and the pressure in the heated layer rises sharply because of the high rate of heating (inertial confinement). A technique has been developed for taking into account 2T, thermomechanical, and multidimensional (target-structuring) phenomena. It is based on quantum-mechanical computations by means of the density functional, the solution of kinetic equations, and 2T hydrodynamic and molecular-dynamic calculations. The mechanism for forming superelastic shock waves and for constructing complex surface structures has been studied. The corresponding results have great significance for developing promising nanometallurgical technologies associated with laser pinning, for increasing corrosion resistance, and for altering optical surface characteristics.
An experimental and theoretical study has been carried out of the ablation of a solid insulator with a wide band gap (LiF) under the action of ultrashort laser pulses of the UV range, obtained in a free-electron laser (pulse width τL=0.3ps, photon energy ħωL=20.2eV), and the soft X-ray region, obtained in a silver-plasma laser (τL=7ps, ħωL=89.3eV). A comparison is made of the results obtained on the two laser systems. It is shown that the ablation threshold is about the same for both lasers. A theory is presented that explains the weak growth of the ablation mass with increasing surface energy density of the laser radiation (the fluence) in the case of X-ray lasers as a result of the transition from spallation close to the ablation threshold to evaporative ablation at high fluence values.
The paper is devoted to experimental and theoretical studies of ablation of condensed matter by optical (OL), extreme ultraviolet (EUV) and X-ray lasers (XRL). Results obtained at two different XRL are compared. The first XRL is collision Ag-plasma laser with pulse duration τL = 7 ps and energy of quanta hv=89.3 eV, while the second one is EUV free electron laser (EUV-FEL) and has parameters τL = 0.3 ps and energy of quanta 20.2 eV. It is shown that ablation thresholds for these XRL at LiF dielectric are approximately the same. A theory is presented which explains slow growth of ablated mass with fluence in case of XRL as a result of transition from spallative ablation near threshold to evaporative ablation at high fluencies. It is found that the metal irradiated by short pulse of OL remains in elastic state even in high shear stresses. Material strength of aluminum at very high deformation rates V/V ~ 109 s-1 is defined.