26 May 2019 in Journal of Advanced Transportation
This paper investigates the potential changes in the geometric design elements in response to a fully autonomous vehicle fleet. When autonomous vehicles completely replace conventional vehicles, the human driver will no longer be a concern. Currently, and for safety reasons, the human driver plays an inherent role in designing highway elements, which depend on the driver’s perception-reaction time, driver’s eye height, and other driver related parameters. This study focuses on the geometric design elements that will directly be affected by the replacement of the human driver with fully autonomous vehicles. Stopping sight distance, decision sight distance, and length of sag and crest vertical curves are geometric design elements directly affected by the projected change. Revised values for these design elements are presented and their effects are quantified using a real-life scenario. An existing roadway designed using current AASHTO standards has been redesigned with the revised values. Compared with the existing design, the proposed design shows significant economic and environmental improvements, given the elimination of the human driver.
1 December 2015 in International Journal of Disaster Risk Reduction
1 June 2007 in Journal of Transportation Engineering
Mostly, design methods in transportation engineering do not address the level of risk associated with the design and use of various highway elements. Passing sight distance (PSD) is an example of a highway operational element analyzed with no risk measures. The aim of this paper is to attach risk indexes to various PSD lengths. The writers devised a unique microscopic simulation using the ARENA software for replicating passing maneuvers on two-lane two-way roads. The simulation monitors the movement of three vehicles: the passing, the impeding, and the opposing vehicles. Two thousand passing attempts are simulated for each PSD length, and a weighed risk index is obtained. The risk index is mainly based on the value of the clearance time between the passing and the opposing vehicles at the end of the passing maneuver. Six levels of risk are identified. Using the simulation results, the writers are able to assess the risk of various PSD lengths for a specific design speed. In addition, the risks associated ...
1 March 2017 in Journal of Computing in Civil Engineering
The traffic speed deflectometer (TSD) is a device used to evaluate the pavement’s structural condition. Measurements obtained from the TSD are affected by noise, which can make it hard to interpret test results. The main objective of this paper is to develop a denoising methodology to use with TSD measurements and improve pavement structural evaluation. The denoising methodology comprises a computational algorithm to identify significant features in a high-dimensional vector of observations containing white Gaussian noise. The algorithm minimizes the classification error of features in the wavelet transform domain by adaptively selecting the level at which to control the false discovery rate. When tested in a simulation study, the results of the proposed algorithm compared favorably with other state-of-the-art methods. The proposed methodology was then successfully used with TSD measurements to identify possible weak joints in a jointed concrete pavement overlaid with an asphalt layer and to calcu...
11 May 2007 in Computer-Aided Civil and Infrastructure Engineering
Passing sight distance (PSD) is provided to ensure the safety of passing maneuvers on two lane two way roads. Many random variables determine the minimum length required for a safe passing maneuver. Current PSD design practices replace these random variables by single-value means in the calculation process, disregarding their inherent variations, which results in a single-value PSD design criteria. The main objective of the article is to derive a PSD distribution that accounts for the variations in the contributing random variables. Two models are devised, a Monte-Carlo simulation model used to obtain the PSD distribution and a closed form analytical estimation model used for verification purposes. The Monte-Carlo simulation model uses random sampling to select the values of the contributing parameters from their corresponding distributions in each run. The analytical model accounts for each parameter variation by using their means and standard deviations in a closed form estimation method. The means and standard deviations of the PSD using both models are compared for verification purposes. Both models use the same PSD formulation. The analysis is conducted for a design speed of 80 Km/h (50 mph). A PSD distribution is developed accordingly. The results of both models differ only by less than 2%. The obtained distribution is used to estimate the reliability index of the current PSD standards at a design speed of 80 Km/h (50 mph).
3 January 2019 in Journal of Intelligent Transportation Systems
The majority of research efforts in the field of access control of autonomous vehicles at intersections are geared towards fully connected vehicles. The underlying assumptions for such efforts are active vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I), infrastructure-to- vehicle (I2V) communications, and/or presence of a central controller. Though efficiency is proven to be significantly enhanced, the assumptions face inherent security and privacy obstacles and require high infrastructure costs. In previous work, the authors designed and demonstrated a simpler, less costly, and more secure approach to autonomous vehicle management at intersections. The approach allows vehicles to make autonomous decisions at intersections based solely on sensing and/or beacon information with no V2V or V2I communications required. This article extends our model to account for various vehicle classes, all possible turns at the intersection with corresponding safe turning speeds, and various intersection geometries. Compared to a fully actuated signal controller, the proposed and improved model is again proven operationally more efficient, as it reduced the average delay per vehicle by at least 21% and up to 51% for the various simulated scenarios. After 40 million seconds of simulation, the proposed model proved collision free operations.