Tungsten carbide is one of the most promising electrocatalysts for the hydrogen evolution reaction, although it exhibits sluggish kinetics due to a strong tungsten-hydrogen bond. In addition, tungsten carbide’s catalytic activity toward the oxygen evolution reaction has yet to be reported. Here, we introduce a superaerophobic nitrogen-doped tungsten carbide nanoarray electrode exhibiting high stability and activity toward hydrogen evolution reaction as well as driving oxygen evolution efficiently in acid. Nitrogen-doping and nanoarray structure accelerate hydrogen gas release from the electrode, realizing a current density of −200 mA cm−2at the potential of −190 mV vs. reversible hydrogen electrode, which manifest one of the best non-noble metal catalysts for hydrogen evolution reaction. Under acidic conditions (0.5 M sulfuric acid), water splitting catalyzed by nitrogen-doped tungsten carbide nanoarray starts from about 1.4 V, and outperforms most other water splitting catalysts.
Hydrogen evolution reaction (HER), as an effective method to produce green hydrogen, is greatly impeded by inefficient mass transfer, i.e., bubble adhesion on electrode, bubble dispersion in the vicinity of electrode, and poor dissolved H 2 diffusion, which results in blocked electrocatalytic area and large H 2 concentration overpotential. Here, we report a superaerophilic/superaerophobic (SAL/SAB) cooperative electrode to efficiently promote bubble transfer by asymmetric Laplace pressure and accelerate dissolved H 2 diffusion through reducing diffusion distance. Benefiting from the enhanced mass transfer, the overpotential for the SAL/SAB cooperative electrode at −10 mA cm −2 is only −19 mV, compared to −61 mV on the flat Pt electrode. By optimizing H 2 SO 4 concentration, the SAL/SAB cooperative electrode can achieve ultrahigh current density (−1867 mA cm −2 ) at an overpotential of −500 mV. We can envision that the SAL/SAB cooperative strategy is an effective method to improve HER efficiency and stimulate the understanding of various gas-involved processes.
Ultrathin 2D metal alloy nanomaterials have great potential applications but their controlled syntheses are limited to few noble metal based systems. Herein NixCo1−x alloy nanosheets with ultrathin (sub‐3 nm) single‐crystalline 2D structure are synthesized through a topochemical reduction method. Moreover, the optimized composition Ni0.6Co0.4 alloy nanosheets array exhibits excellent performances for hydrazine oxidation reaction and direct hydrazine fuel cells.
The rational structure and composition manipulation for the efficient, affordable bifunctional electrocatalysts of the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR) is critical for renewable-energy technologies including fuel cells and metal–air batteries. Metal oxide nanoarray electrodes are considered to be alternative options for this issue, although they always suffer from poor conductivity and limited ORR performance in terms of onset potential and diffusion current. In this study, we develop an alternative strategy to prepare a novel bifunctional catalyst by coating three-dimensional CoOx nanoarrays with a porous nitrogen-doped carbon layer (NC). The porous NC not only provides a conductive coating to benefit the charge transfer and retains the channels for electrolyte diffusion, but also greatly enhances the electrochemical surface area, which endows the electrode with higher activity for both the OER and ORR in terms of onset potential and diffusion current. When employed as an air cathode in rechargeable zinc–air batteries over 100 cycles, the electrode exhibits durable performance superior to those of Pt/C and IrO2/C. The results fully demonstrate the great potential of the strategy in electrode construction.
The fabrication of cost effective and efficient electrocatalysts with functional building blocks to replace noble metal ones is of great importance for energy related applications yet remains a great challenge. Herein, we report the fabrication of a hierarchical structure containing CNTs/graphene/transition-metal hybrids (h-NCNTs/Gr/TM) with excellent bifunctional oxygen electrocatalytic activity. The synthesis was rationally designed by the growth of shorter nitrogen-doped CNTs (S-NCNTs) on longer NCNTs arrays (L-NCNTs), while graphene layers were in situ generated at their interconnecting sites. The hybrid material shows excellent OER and ORR performance, and was also demonstrated to be a highly active bifunctional catalyst for Zn–air batteries, which could be due to rapid electron transport and full exposure of active sites in the hierarchical structure.