17 May 2017 in Sustainable Energy & Fuels
This review provides a summary of recent research progress towards biomass-derived carbon electrode materials, including specific cellulose-, lignin- and hemicellulose-derived carbon electrode materials, for supercapacitors.
1 December 2018 in Carbon
30 April 2018 in Journal of Materials Chemistry A
Hierarchical porous carbon prepared with calcium-containing nanocrystalline beta zeolite as the template and ethylene as the carbon source at a relatively low carbonization temperature (600 °C) displayed excellent electrocapacitive properties. The presence of both micro/mesopores and surface oxygen-containing groups on the ordered porous structure, along with a high specific surface area (2280 m2 g−1) and pore volume (1.95 cm3 g−1) coupled with good wettability towards the electrolyte enabled the carbon to perform well as a supercapacitor electrode. This carbon electrode achieved a specific capacitance of 250 F g−1 at a current density of 1 A g−1 with 1 M H2SO4 as the aqueous electrolyte measured in a three-electrode system. A symmetric capacitor fabricated with the carbon as both electrodes exhibited a specific capacitance of 161 F g−1 at a current density of 1 A g−1, and an excellent cycling stability. After being cycled 17 000 times and shelved for another two months, the electrode exhibited a specific capacitance of 246 F g−1 at 1 A g−1, 153% of the initial capacitance, and still maintained an excellent cycle stability. Besides, an all-solid-state supercapacitor cell fabricated with this carbon as both electrodes and polyvinyl alcohol/H2SO4 gel as the electrolyte displayed an areal specific capacitance of 413 mF cm−2 at a current density of 0.25 mA cm−2.
1 January 2017 in Journal of Materials Processing Technology
1 April 2016 in Materials Science and Engineering: A
16 September 2019 in Journal of Materials Chemistry A
RGRohit Ranganathan Gaddam
+2
An approach for producing defect-containing porous carbon from microcrystalline cellulose is proposed. A sample with intrinsic defects and a low level of nitrogen doping prepared at a carbonisation temperature of 600 °C followed by thermal treatment in a reducing environment exhibited excellent performance both as a supercapacitor electrode and oxygen reduction reaction (ORR) electrocatalyst. With 1 M H2SO4 aqueous electrolyte, it delivered a specific capacitance of 426 F g−1 at a current density of 0.25 A g−1 or 177 F g−1 at 100 A g−1 measured using a three-electrode system. About 90% of its original capacitance was retained after 60 000 cycles at 5 A g−1 measured in a symmetric supercapacitor cell. In addition, the electrode with a mass loading of 12 mg cm−2 exhibited areal capacitances of 2518 and 1128 mF cm−2 at current densities of 0.5 and 50 mA cm−2, respectively, along with a good cycling stability. Three-electrode system electrochemical analysis reveals that the porous structure and low amount of N/O doping of the sample were more fully and efficiently utilised for charge storage via electrical double-layer and pseudocapacitive mechanisms, respectively, as the presence of intrinsic defects further changed its electronic structure. A symmetric supercapacitor assembled with this carbon electrode in 1 M LiCl electrolyte exhibited an energy density of 20.7 W h kg−1 at a power density of 426 W kg−1. This sample also demonstrated good performance in the ORR due to the presence of intrinsic defects, which promoted electron transfer. It was observed that increasing the thermal treatment temperature is favourable for further improving the ORR activity.