Cell-free widely distributed massive multiple-input multiple-output (MIMO) systems utilize radio units spread out over a large geographical area. The radio signal of a user equipment (UE) is coherently detected by a subset of radio units (RUs) in the vicinity of the UE and processed jointly at the nearest baseband processing unit (BPU). This architecture promises two orders of magnitude less transmit power, spatial focusing at the UE position for high reliability, and consistent throughput over the coverage area. All these properties have been investigated so far from a theoretical point of view. To the best of our knowledge, this work presents the first empirical radio wave propagation measurements in the form of time-variant channel transfer functions for a linear, widely distributed antenna array with 32 single antenna RUs spread out over a range of 46.5 m. The large aperture allows for valuable insights into the propagation characteristics of cell-free systems. Three different co-located and widely distributed RU configurations and their properties in an urban environment are analyzed in terms of time-variant delay-spread, Doppler spread, path-loss, and the correlation of the local scattering function over space. For the development of 6G cell-free massive MIMO transceiver algorithms, we analyze properties such as channel hardening, channel aging as well as the signal to interference and noise ratio (SINR). Our empirical evidence supports the promising claims for widely distributed cell-free systems.
24 December 2024 in IEEE Open Journal of Vehicular Technology
Understanding multi-node vehicular wireless communication channels is crucial for future time-sensitive safety applications for human-piloted as well as partly autonomous vehicles on roads, railways and in the air. These highly dynamic wireless communication channels are characterized by rapidly changing channel statistics. In this paper we present the first fully mobile multi-node vehicular wireless channel sounding system, which is capable of simultaneously capturing multiple channel frequency responses, ensuring that measurement conditions are identical for all observed links. We use it to analyze road scenarios with multiple vehicles and a large obstructing double-decker bus. The empirical measurement data is used to parametrize a model for the large obstructing vehicle within a geometry-based stochastic channel model. We compare the time-variant channel statistics obtained from our channel model with the ones from the measurement campaign. By means of a channel emulator we obtain the packet error rates of commercial modems for the measured and the simulated wireless communication channels and compare them, in order to validate the model at the link level. We find that the path loss, the root mean square (RMS) delay spread, and the RMS Doppler spread deviate by less than 3.6 dB, 78 ns, and 52 Hz, respectively, for 80% of the total simulation duration. The PER obtained from measured data is within the maximum and minimum bounds of our model for 86% of the simulation duration.
Massive multiple-input multiple-output (MIMO) systems are of high interest for ultrareliable low-latency communication (URLLC) links. They provide channel hardening, i.e. reduced channel variations, due to the large number of transmit antennas which exploit spatial diversity by beam-forming. Massive MIMO requires channel state information (CSI) on the base station side. For time-varying vehicular communication channels the CSI acquired during the uplink phase will be outdated for the following downlink phase, leading to reduced spatial channel hardening. We investigate a combination of massive MIMO with general orthogonal precoding (OP) to compensate this effect. OP uses two-dimensional precoding sequences in the time-frequency domain and provides channel hardening by exploiting timeand frequency diversity. We show that the combination of massive MIMO and OP is beneficial for timevarying communication channels. While the spatial channel hardening of massive MIMO decreases, the time-frequency channel hardening of OP increases with larger time-variance of the communication channel. An iterative receiver algorithm for massive MIMO with OP as well as a detailed analysis of the channel hardening effect is presented. We demonstrate a BER reduction by more than one order of magnitude for a velocity of 50 km/h = 16; 6 m/s using the orthogonal frequency division multiplexing (OFDM) based 5G new radio (NR) physical layer.