Sliver colloidal solutions were synthesized by Nd: YAG laser ablation 1064 nm of a high purity silver target immersed in deionised water. The effect of water layer thickness on the laser ablation efficiency of nanoparticles was investigated experimentally. UV-Vis spectrophotometer and transmission electron microscopy observations were employed to characterize the optical spectra and particle sizes of colloids, respectively. The optimum parameter of the water layer thickness (which yielded the maximum ablation efficiency) was determined. It was demonstrated that both: the average particle size and the ablation efficiency which can be tuned by choosing suitable experimental parameters of liquid layer thickness, laser fluence and post-ablation laser wavelength. Average particle size and redistribution of nanoparticles was controlled by the subsequent treatment of the ablated colloid solution with combination of 1064 and 532 nm pulses. The effects of post-ablation under laser-induced particle modification reduced the average particle size from 15.1 to 4.3 nm. Particle size distribution was also narrowed with 532 nm pulses.
In-situ sol-gel procedure is used to synthesize the silica-titania nanocomposite (SiO2-TiO2) as host matrix which is doped with ZnO and heated at 300 °C for 1 hr for homogeneous and stable matrix surface. The mixture of organic dyes i. e. cresol red, bromophenol blue, phenol red and phenolphthalein is encapsulated within ZnO:SiO2-TiO2 nanocomposite for the evaluation of sensing activity at dynamic pH range 1-12. Microscopic findings showed that the synthesized nanocomposites have homogeneous crack-free porous coating with low roughness value of 9.7–7.6 nm. XRD analysis shows the formation of new phase ZnSiO3 after ZnO doping and heat treatment along with anatase phase of titania and silica. TEM analysis confirmed the spherical nanoparticles. The heterogeneous bonding of synthesized Zn:SiO2-TiO2 composites is investigated by FTIR. Surface analysis confirmed that prepared nanocomposites have high surface area, large pore diameters and mesoporous nature, which is desirable for good sensing behavior. Optical studies show that low refractive index (1.33-1.39) transparent nanocomposites (92-62% transparency in the visible range) are promising for sensing applications. TGA analysis shows that SiO2-TiO2 nanocomposites after ZnO doping and heat treatment are thermally stable. The fast response 0.15 s of the ZnO:SiO2-TiO2 nanocomposite coated fiber optic sensor is optimized at pH 12. The observed sensitivity is of 15 counts/pH with repeatability of 93% at 440 nm.