This paper investigated the CM noise model for multi-winding switching transformers. Based on the proposed model, a Flyback transformer is investigated. A measurement technique is used to characterize and evaluate switching transformer’s CM noise performance. Only a signal generator and an oscilloscope are needed in this measurement technique. Because there is no any in-circuit tests are needed, the technique can help quickly design and evaluate transformers in mass testing. CM noise reduction techniques including balance capacitor technique, core shielding technique, balance winding technique and winding design technique are investigated based on the developed twocapacitance model and measurement technique without introducing extra power loss. The near field capacitive coupling due to transformer magnetic cores is analyzed and a core shielding technique is applied to reduce the coupling. Experimental results validated the proposed model and the developed CM noise reduction techniques. The Flyback converter can finally meet EMI standards without using CM EMI filters and Y capacitors.
20 October 2020 in IEEE Transactions on Power Electronics
This paper first develops a radiated EMI model for a GaN IC-based active clamp flyback converter. Important capacitive couplings, which play a big role in the radiated EMI, are identified, extracted, and validated in the converter. The radiated EMI model is improved to characterize the impact of capacitive couplings. Based on the improved model, techniques to reduce capacitive couplings and the radiated EMI are proposed and experimentally validated.
26 November 2019 in IEEE Transactions on Power Electronics
In consumer electronics, high power density power adapters are designed to minimize the adapter size. As a result, the components are getting very close and the near field coupling issue tends to be severe. This compromises the performance of EMI filters, especially at high frequencies. This paper investigates near field capacitive couplings and the reduction techniques in a high power-density power adapter with a DC-bus filter. The parasitic capacitive coupling theory is developed and parasitic coupling capacitances are experimentally extracted. The CM noise model with parasitic capacitive couplings is developed and the techniques to reduce the CM noise due to parasitic capacitive couplings are explored. Simulation and experiments were conducted to verify the analysis and the proposed techniques.
23 November 2020 in IEEE Transactions on Power Electronics
This paper first investigates the equivalent parallel capacitance (EPC) and equivalent parallel resistance (EPR) due to the electromagnetic field inside the Mn-Zn ferrite toroidal cores of the inductors with a single-layer winding based on electromagnetic theory. From the investigation, the effects of cores cross sectional shape and number of winding turns on the EPC and EPR are explored. A stacked core structure was studied to increase the inductors high frequency (HF) impedance for EMI suppression. The paper further investigated the EPC due to the electric field energy in the space between winding turns, and between the winding turns and the core. The effect of the number of winding turns on total EPC was also explored. The technique to achieve high HF impedance was proposed with an optimal number of winding turns. Both simulations and experiments were conducted to validate the developed theory and techniques.
3 June 2022 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Alternating current (ac)/ Direct current (dc) power converters with dc-bus filters can achieve high power density, however, it was found in this article that the reverse recovery currents of the 50/60 Hz diode bridge can lead to significant electromagnetic interference (EMI) noise violating EMI standards above 150 kHz. This article analyzed and quantified the mechanism of the EMI generation due to the reverse recovery currents of the 50/60 Hz diodes. It was found that although the reverse recovery of the 50/60 Hz diode bridge repeats at a frequency of 50/60 Hz, the EMI can be very high above 150 kHz due to the operating principle of electromagnetic compatibility spectrum analyzers. Two techniques were proposed to reduce the EMI due to the reverse recovery of the diode bridge. The analyses were validated by either simulations or experiments.
6 February 2018 in IEEE Transactions on Electromagnetic Compatibility
The common-mode (CM) noise at the output of ac/dc power adapters can interfere with touchscreen's normal operation in consumer electronic products. Existing power adapter's output CM voltage measurement used in power electronics industry does not align with the touchscreen's sensitivity test used by touchscreen manufacturers. This paper first reviews existing measurement setups and identifies the technical issues in the tests. The CM noise source impedance of ac/dc power adapters and the characteristics of touchscreens are investigated. A new measurement setup is proposed based on both the characteristics of CM noise source of power adapters and touchscreens. A CM voltage limit is also proposed with industry companies. A measurement device is developed for the proposed measurement setup and procedure. The experimental results validate the proposed techniques.