23 December 2023 in Textile Research Journal
Yarn tension during ring spinning is influenced by the shape of the balloon. With the high speed of ring spinning, the existing balloon control technology will have problems with yarn breakage caused by increased tension and yarn wear during the spinning process. Therefore, this article takes the naturally formed multi-balloon as the research object and analyzes the force of the yarn in the balloon section to establish the mathematical model of the steady-state balloon section. Then we selected the appropriate parameters to compare the balloon trajectory graph obtained by simulation and experiment, to verify the validity of the mathematical model. Finally, the relationship between the yarn tension and the number of balloon segments under different balloon heights and spindle speeds, and the conditions for the stable shape of multi-balloon are discussed. It was found that under different balloon shapes, increasing the number of balloon segments can effectively reduce the yarn tension at the yarn guide, and the stable conditions of balloons with different numbers of segments under certain process conditions. The findings are of great significance to the subsequent research on the technological parameters of low-tension spinning and the structural design of ring-spinning machines.
2 September 2025 in Textile Research Journal
With the growing demand for nonwoven materials in high-end applications, traditional offline basis-weight measurements interrupt continuous production, and in-line weight-detection systems on carding machines only provide coarse, localized weight profiles (typically at centimeter-scale resolution), and cannot resolve fiber- or pore-level distribution uniformity. This paper proposes an online quality-inspection method for nonwoven fiber webs using machine vision and deep learning. High-resolution images captured on a bespoke inspection platform are preprocessed via wavelet transforms and image-enhancement techniques. A convolutional neural network regression model then estimates web basis weight in real time. To quantify fiber-distribution uniformity, this paper introduces a porosity-based metric and demonstrates that its coefficient of variation (CV) correlates strongly with the CV of measured web basis weight. The proposed approach delivers data-driven support for real-time adjustment of carding-machine process parameters, thereby overcoming the technical challenge of online uniformity monitoring in high-end nonwoven fabric production.
6 February 2024 in Textile Research Journal
The synthetic filament winder drives the filament through the traverse mechanism with rotary wings so that it can complete the transverse reciprocating motion when it is continuously wound and achieve the spiral distribution on the cylindrical package. When the existing traverse mechanism leads the filament, the filament is easy to oscillate and breaks away from the control of the rotary blade during the reversing process at both ends of the package, which directly affects its forming on the package. In this study, firstly, the filament leading process is analyzed from the filament leading principle of the traverse mechanism with rotary wings and the key points of the profile are identified. Secondly, we applied parameter constraints of key points and developed a blade profile that can not only meet the demand of filament reversing but also improve the above abnormal phenomena by curve-fitting, so that the blade can continuously and stably lead and control the filament during the reversing process. Finally, through the actual winding experiment, we contrasted the state of the filament leading process of the original blades with the improved blades, and verified the improvement effect. This study provides a design basis and optimization reference for realizing a smooth and stable relay between the filament and blades.