18 June 2007 in IEEE Transactions on Plasma Science
This paper deals with the experimental results on prebreakdown phenomena and breakdown voltage characteristics of a negative dc point-to-plane gap in-compressed carbon dioxide up to the supercritical pressure as the first step to develop a plasma reactor with supercritical carbon dioxide. The gap length and the curvature radius of the point tip were 200 and around 35 mum, respectively. The experimental results show the following: 1) corona discharge preceding complete breakdown is observed more clearly in liquid and supercritical fluid than in gas; 2) the estimated discharge onset voltage according to the streamer theory is in fairly good agreement with the measured breakdown voltage in the gas density region of 0.1-30 kg ldr m-3; 3) the breakdown mechanism in liquid can be classified into two categories: bubble-triggered breakdown at lower pressure and non bubble-triggered breakdown at higher pressure; 4) the breakdown mechanism in supercritical fluid is similar to that in higher pressured liquid; and 5) the density and temperature dependences of breakdown voltage in liquid and supercritical fluid are related closely with the breakdown mechanism.
26 June 2002 in Electrical Engineering in Japan
22 March 2010 in IEEE Transactions on Plasma Science
The high reliability, high repetition rate, high performance, and compactness of pulsed-power generators are required for industrial applications. Also, the control of a pulsed-power generator becomes more complicated with increasing functions. An all-solid-state pulsed-power generator can be controlled by using a field-programmable gate array (FPGA). The pulsed-power generator consists of a charger, a magnetic pulse compression circuit, and a controller using the FPGA. The performance characteristics of the pulsed-power generator, such as the variable firing interval from shot to shot and the diagnosis of incorrect operation, are easily achieved by rewriting the programming of the Verilog hardware description language on the FPGA.
13 February 2017 in Biotechnology for Biofuels
Recent understanding that specific algae have high hydrocarbon production potential has attracted considerable attention. Botryococcus braunii is a microalga with an extracellular hydrocarbon matrix, which makes it an appropriate green energy source. This study focuses on extracting oil from the microalgae matrix rather than the cells, eliminating the need for an excessive electric field to create electro-permeabilization. In such a way, technical limitations due to high extraction energy and cost can be overcome. Here, nanosecond pulsed electric fields (nsPEF) with 80 ns duration and 20–65 kV/cm electric fields were applied. To understand the extraction mechanism, the structure of the algae was accurately studied under fluorescence microscope; extraction was quantified using image analysis; quality of extraction was examined by thin-layer chromatography (TLC); and the cell/matrix separation was observed real-time under a microscope during nsPEF application. Furthermore, optimization was carried out by screening values of electric fields, pulse repetition frequencies, and energy spent. The results offer a novel method applicable for fast and continues hydrocarbon extraction process at low energy cost.
1 January 2010 in Journal of Advanced Oxidation Technologies
Energy efficient generation of ozone is very important because ozone is being used increasingly in a wide range of industrial applications. In this study, ultra-short duration pulsed streamer discharges with a duration of 5 ns hava been used to produce ozone in a wire-to-cylinder electrode reactor. The triaxial Blumlein configuration is used for the nano-seconds pulsed generator. Ozone concentration and ozone production yield were measured at various applied voltages (50 to 70 kV), and pulse repetitions (10 to 60 pps) at atomospheric pressure in oxygen and air. The experimental results showed that the ozone concentration (g/m
12 December 2007 in IEEE Transactions on Plasma Science
A low-inductance circuit has been fabricated in order to investigate loss characteristics of the magnetic cores under fast pulse magnetization. The B-H curves have been derived from the measured voltage and current waveforms, and the losses of the magnetic cores have been derived using a novel method to determine time to saturation. The derived B-H curves show the following characteristics: a high ratio of unsaturated to saturated permeability (muun/musat), a maximum flux swing of about 2.5 T, a high ratio of remanent flux density to saturation magnetic flux density (Br/Bs), and a low core loss. Furthermore, the core loss increases as the charging energy increases for a fixed capacitance, which means that the core loss is inversely proportional to the time to saturation, whereas the percentile core loss decreases as the charging energy increases. The hysteresis loss is proportional to frequency, and the eddy current loss can be neglected for the used core. The dissipated energy during core saturation is consistently 3.0% of the charging energy for each frequency, which indicates that the core is saturated and behaves as an air core.