1 February 2022 in Physics of Fluids
Transient cavity dynamics in the oblique water entry of a cylinder at a constant velocity is investigated. The drag force exerted on the cylinder is measured by a force sensor, and the evolution of a cavity is recorded simultaneously by a high-speed camera. A simple theoretical model, based on the decomposition of gravity force, is proposed to describe the asymmetric cavity formed in the oblique water entry. Theoretically predicted cavity shapes compare favorably with the experimental and numerical results. Moreover, it is found that with a factor indicating the effect of entry angle, the pinch-off time and position in oblique and vertical water entry problems follow the same scaling law.
4 October 2019 in Journal of Fluids Engineering
Cavitation may develop on upward-launched submerged objects approaching sea surface with high speed. In this work, the cavitation shedding and collapse during the water-exit of an axisymmetric projectile is investigated using large eddy simulation (LES). High resolution is guaranteed by carefully fulfilling the requisites of y+<1, Δx+<100, and Δz+<40 to resolve at least 80% of the turbulent kinetic energy. The result indicates that the cavity in growth is always undeveloped as the ambient hydrostatic pressure keeps decreasing. The cavity is pushed by the water surface to shed downward and keep shrinking until its final collapse. The vapor inside cavity during the water-exit process is separated by a layer of water so as not to mix with the air. The front of the re-entrant jet barely catches up with the moving wall, and the cavity is pinched off by the joint effect of the jet front and water surface. It is also found that the angle of attack (AOA) generates inversely inclined liquid-vapor contact lines of the cavity leading edge and cavity closure. The advancing contact lines finally intersect on the pressure side to make the cavity break off, which can cause noticeable pressure impulse on the break-off spot. The pressure feature of the water-exit cavitation evolution is studied with intensively arranged monitor points on the wall, which can sense pressure peaks when the liquid-vapor contact lines sweep over them. The instantaneous high pressure induced by cavitation collapse is resolved.
1 March 2022 in Physics of Fluids
This paper uses experimental and numerical methods to present the hydrodynamic characteristics of water and air flows during vertical water entry of a sphere. In the experiment, a high-speed camera is equipped for multi-perspective recording of the cavity evolution process and particle image velocimetry is used to capture the velocity fields outside the cavity via different types of tracer particles applied to air and water. A theoretical solution for the velocity of a sphere as it enters water is developed. It provides a proper drag coefficient for a sphere with a water entry cavity and shows good agreement with the experimental results. A high-efficiency smoothed particle hydrodynamics method with adaptive particle refinement is employed for the numerical simulation due to its good performance in capturing cavity splash. The size of the water-entry cavity and the velocity field results are verified mutually using our experimental data. Moreover, the numerical results provide flow-field information regarding the volume inside the cavity, which is difficult to obtain via experimental means.
30 November 2010 in Journal of Shanghai Jiaotong University (Science)
1 January 2026 in Physics of Fluids
The safety of seaplane operations during water landings is critically influenced by wave-induced slamming loads, particularly in emergency scenarios. This study employs a validated numerical model incorporating heave and pitch motions to investigate the effects of wave phase angle, initial water contact point, and pitch angle on slamming dynamics. Peak vertical overloads are most severe during wave crest and trough landings due to rapid expansion of the hull–wave contact area. A water particle velocity factor, accounting for the relative motion between the seaplane and waves, is introduced to establish a linear correlation between peak impact loads and wetted area for nearly all phase angles. The results demonstrate that forward displacement of the initial water contact point reduces peak loads, while variations in pitch angle exhibit non-monotonic behavior. Maximum loading occurs at 0° pitch due to full hull engagement, while a 6° pitch induces a localized near-parallel contact of the aftbody with the wave surface, resulting in a rebound in the peak load. The results provide support for predicting transient loads and optimizing structural designs to withstand slamming loads.
1 February 2009 in Journal of Shanghai Jiaotong University (Science)