Magnetohydrodynamic (MHD) simulations of electrically exploded aluminum and copper rods demonstrate a technique to validate equations of state (EOS) for rapidly Joule-heated conductors. The balance of internal and magnetic forces at the conductor-insulator interface drives the metal there along the vaporization phase boundary. Variations between critical points and vaporization curves in existing models predict differing densities and temperatures in MHD simulations for these models. The inclusion of Maxwell constructs in the liquid-vapor biphase region of the EOS caused the rod surface to vaporize earlier in time than unmodified tables with van der Waals loops. Velocimetry of recent experiments is used to validate the location of the vaporization curve in existing EOS models and differentiate between the vapor dome treatments. Dielectric coatings applied to the metal surface restricted the conductor's expansion and diverted the metal into the warm dense matter regime.
The fundamental limits of high-current conduction and response of metal conductors to large, fast current pulses are of interest to high-speed fuses, exploding wires and foils, and magnetically driven dynamic material property and inertial confinement fusion experiments. A collaboration between the University of Nevada, Reno, University of New Mexico, and Sandia National Laboratory has fielded an electrically thick (R~400-μm > skin-depth) cylindrical metal rod target in a Z-pinch configuration driven by the Sandia 100-ns, 900-kA Mykonos linear transformer driver [1] . Photonic Doppler velocimetry (PDV) measuring the expansion velocity of pure copper rods [2] coated with ~30-μm of Parylene-N was used to benchmark magnetohydrodynamics simulations of the rods with the Los Alamos National Laboratory code FLAG [3] . Simulations of uncoated copper rods showed the metal surface followed the liquid-vapor coexistence curve to near the critical point. The dielectric coating, however, acts as an inertial tamper that opposes the rod’s expansion and compresses the surface into a low-density liquid as it heats up—eventually bypassing the vapor state and forming warm dense matter. The expansion velocities associated with simulations using various equation of state models were then compared to the PDV data to validate these models for MHD simulations of expanded Cu.