This work reports the in-depth resolved Raman scattering analysis with different excitation wavelengths of layers. Secondary phases constitute a central problem in this material, particularly since they cannot be distinguished by x-ray diffraction. Raman spectra measured with 325 nm excitation light after sputtering the layers to different depths show peaks that are not detectable by excitation in the visible. These are identified with modes at the surface region while spectra measured close to the back region show peaks from ZnS and . Observation of ZnS is enhanced by resonant excitation conditions achieved when working with UV excitation.
1 May 2013 in Solar Energy Materials and Solar Cells
This article reports a detailed Raman scattering and microstructural characterization of S-rich absorbers produced by electrodeposition of nanocrystalline precursors and subsequent reactive annealing under sulfurizing conditions. Surface and in-depth resolved Raman microprobe measurements have been correlated with the analysis of the layers by optical and scanning electron microscopy, x-ray diffraction, and in-depth Auger electron spectroscopy. This has allowed corroboration of the high crystalline quality of the sulfurized layers. The sulfurizing conditions used also lead to the formation of a relatively thick intermediate layer between the absorber and the Mo back contact. The analysis of the absorbers has also allowed identification of the presence of In-rich secondary phases, which are likely related to the coexistence in the electrodeposited precursors of ordered vacancy compound domains with the main chalcopyrite phase, in spite of the Cu-rich conditions used in the growth. This points out the higher complexity of the electrodeposition and sulfurization processes in relation to those based in vacuum deposition techniques.