Thermal radiation is the dominant mode of heat transfer in many combustion systems, and in typical flameless furnaces, it can represent up to 80% of the total heat transfer. Accurate modeling of radiative heat transfer is, thus, crucial in the design of these large-scale combustion systems. Thermal radiation impacts the thermochemistry, thereby the energy efficiency and the temperature sensitive species prediction, such as NOx and soot. The requirement to accurately describe the spectral dependence of gaseous radiative properties of combustion products interacts with the modeling of finite rate chemistry effects and conjugates heat transfer and turbulence. Additionally, because of the multiple injection of fuels and/or oxidizers of various compositions, case-specific radiative properties' expressions are required. Along these lines, a comprehensive modeling to couple radiation and combustion in reacting flows is attempted and applied to the simulation of flameless combustion. Radiation is modeled using the spectral line-based weighted-sum-of-gray-gases approach to calculate gaseous radiative properties of combustion products using the correlation of the line-by-line spectra of H2O and CO2. The emissivity weights and absorption coefficients were optimized for a range of optical thicknesses and temperatures encountered in the considered furnace. Efforts were also made on the development of a reliable and detailed experimental dataset for validation. Measurements are performed in a low calorific value syngas furnace operating under flameless combustion. This test rig features a thermal charge which can extract about 60% of combustion heat release via 80% of radiative heat transfer, making it of special interest for modeling validation. The comparison between the simulation and the experiment demonstrated a fair prediction of heat transfer, energy balance, temperature, and chemical species fields.
11 June 2012 in Journal of Physics: Conference Series
The Spectral Line-based Weighted-Sum-of-Gray-Gases (SLWSGG) model is applied to calculate the gaseous radiative properties of the aero- or oxy-combustion products of low heating value gases issued from steel making process such as Blast Furnace Gas (BFG) as well as of high heating value gases such as Coke Oven Gas (COG) and conventional Natural Gas (NG). The comparison of total emissivities shows that the 3-gray-gases SLWSGG model is in very good agreement with the Hottel and Sarofim's database. The 3-gray-gases SLWSGG model is then integrated into AnsysFluent® Discrete Ordinates method under User Defined Function and CFD simulations are performed using these combined models. The simulations are done, with full combustion-radiation coupling, for steel reheating furnaces firing on three types of gases: BFG, COG and NG. The results are compared with the simulations realized with the 1-gray-gas WSGG model available in AnsysFluent®. The comparison shows that the 1-gray-gas WSGG model highly overestimates the steel discharging temperature as compared to the 3-gray-gases SLWSGG model. Significant temperature differences are observed between the two radiative models, i.e. 116°C, 55°C and 67°C for the BFG, COG and NG cases, respectively. It can be concluded that the 3-gray-gases SLWSGG model should be used to calculate the radiation heat transfer in large industrial furnaces with more accuracy not only for low heating value gases such as BFG but also for high heating value gases such as COG and NG.