Due to the abundance of sodium and the comparable working principle to lithium-ion technology, sodium-ion batteries (SIBs) are of high interest as sustainable electochemical energy storage devices. Non-graphitizing (“hard”) carbons are widely investigated as negative electrode materials due to their high sodium storage capacity close to the potential of Na/Na+, excellent safety, and simple synthesis pathways from abundant resources. The accumulation of sodium in “closed pores” that are inaccessible to the electrolyte solvent molecules is typically considered as a main source of capacity. While several features such as the microstructure of hard carbons (controllable by e.g. precursors or carbonization conditions) on their electrochemical properties have been widely investigated, the influence of macropores and domain sizes of hard carbons received less research attention. We investigate the use of polystyrene as a sacrificial template to introduce additional internal porosity into glucose-derived hard carbons, in the form of micrometer-sized channels, and the effect on the sodium storage properties and irreversible processes. Despite no significant changes in the microstructure of the hard carbons, pronounced differences in their electrochemical signature can be resolved at working potentials above, but also below 0 V vs. Na/Na+ for different polystyrene amounts and thus macropore contents. Carbons with higher polystyrene amount exhibit higher reversible sodium storage capacity, but also suffer from a more pronounced capacity loss due to irreversible reactions in the first cycle(s). Furthermore, their sodium nucleation overpotential is shifted to higher values in capacity limited measurements, which is likely due to the higher electric resistance. The necessary time to achieve full sodiation capacity increases with a lower content of macropores.
Amphiphilic polymer materials find a wide range of applications in medicine and diagnostics. Often such polymers are required to be able to adapt their properties depending on the surrounding conditions or external stimuli for targeted application in the body. In this work, we propose an approach for the synthesis of temperature and light-responsive copolymers by introducing azobenzene fragments in the side chain of poly(2-oxazoline)s. Three series of well-defined P(EtOx-co-AzBenOx) copolymers with molecular weights ranging from 6000 to 21 000 g mol−1 and containing 6–21 mol% of azobenzene were synthesized via sequential hydrolysis/modification of poly(2-ethyl-2-oxazoline) homopolymers. The turbidimetry studies confirm the thermo-responsive behavior of the obtained copolymers, while spectroscopic studies confirmed the reversible isomerization of AzBenOx units under UV and visible light exposure. The presence of nanoparticles in aqueous solutions of the respective poly(2-oxazoline)s was confirmed by dynamic light scattering. Further DLS experiments revealed the changes in the size of these nanoparticles in response to UV irradiation.
The ability of light to change the properties of light‐responsive polymers opens avenues for targeted release of cargo with a high degree of spatial and temporal control. Recently, we established photoacid polymers as light‐switchable macromolecular amphiphiles. In these systems, light‐induced excited‐state proton transfer (ESPT) causes changes in amphilicity. However, as the intermolecular process itself critically depends on the local environment of the photoacid unit within the polymer, the overall amphiphilicity directly influences ESPT. Thus, understanding the impact of the local environment on the photophysics of photoacidic side chains is key to material design. In this contribution we address both thermodynamic and kinetic aspects of ESPT in oxazoline‐based amphiphilic polymers with pyrenol‐based photoacid side chains. We will compare the effect of polymer design, i. e. statistical and block arrangements, i. e. in poly[(2‐ethyl‐2‐oxazoline)‐co‐(1‐(6/8‐hydroxyperene)sulphonylaziridine)] and poly(2‐ethyl‐2‐oxazoline)‐block‐poly[(2‐ethyl‐2‐oxazoline)‐co‐(2‐(3‐(6‐hydroxypyrene)sulphonamide)propyl‐2‐oxazoline), on the intermolecular proton transfer reaction by combining steady‐state and time‐resolved absorption and emission spectroscopy. ESPT appears more prominent in the statistical copolymer compared to a block copolymer with overall similar pyrenol loading. We hypothesize that the difference is due to different local chain arrangements adopted by the polymers in the two cases.
In this work we present a set of multi-stimuli responsive copolymers based on the photoresponsive 1-pyrenol-based monomer N-(3-((6/8-hydroxypyrene)-1-sulfonamido)propyl)methacrylamide HPSAPMA and oligo(ethylene glycol) (OEGMA) comonomers of varying molecular weight. The copolymers with the general structure P[(OEGaMA)x-co-HPSAPMAy] (a = 3, 5, 9) are prepared with varying functional comonomer compositions via reversible addition fragmentation chain transfer (RAFT) polymerization. The photo- and pH-responsiveness is introduced by the 1-pyrenol moiety as 1-pyrenol allows for excited state proton transfer (ESPT) upon irradiation, enabling the spatiotemporal manipulation of the materials protonation state and the respective proton concentration (pH) with visible light. The implementation of hydrophilic comonomers based on OEGMA, i.e. OEG9MA, OEG5MA and OEG3MA, ensures applicability in aqueous media and simultaneously introduces a temperature-sensitive fragment, rendering these materials responsive to three different stimuli.
18 May 2023 in Macromolecular Rapid Communications
Light‐responsive polymers are a prospective area of smart materials. The increasing number of potential applications of these materials require the development of new polymers sensitive to external irradiation. However, most of the polymers reported so far are represented by poly(meth)acrylates. In this work, the straightforward approach is proposed to the synthesis of light‐responsive poly(2‐oxazoline)s via cationic ring‐opening polymerization of 2‐azobenzenyl‐2‐oxazoline (2‐(4‐(phenyldiazenyl)phenyl)‐2‐oxazoline). Polymerization kinetics studies reveal significant activity of the new monomer in both homopolymerization and copolymerization with 2‐ethyl‐2‐oxazoline. The difference in monomer reactivity allows obtaining both gradient and block copolymers via simultaneous or subsequent one‐pot polymerization, respectively, leading to a set of well‐defined gradient and block copoly(2‐oxazoline)s with 10–40% of azobenzene units. Due to their amphiphilic nature, the materials self‐assemble in water, which is proven by dynamic light scattering and transmission electron microscopy. The change in polarity caused by the isomerization of azobenzene fragments in response to UV light irradiation results in a change of nanoparticle size. The obtained results provide a new impulse for the development of light‐responsive materials based on poly(2‐oxazoline)s.