A shape-selective preparation method was used to obtain highly crystalline rod-, needle-, nut-, and doughnut-like ZnO morphologies with distinct particle sizes and surface areas. We study the nucleation and growth mechanism of those structures and the influence of physical–chemical parameters, such as the solvent and the pH of the solution, on the morphology, as well as the structural and optical properties. A clear correlation between the growth rate along the c-axis and surface defects was established. Our results suggest that the needle- and rod-like morphologies are formed due to the crystal growth orientation along the c-axis and the occurrence of crystalline defects, such as oxygen vacancies and interstitial Zn2+ located at the surface, whereas nuts and doughnuts are formed due to growth along all crystalline planes except those related to growth along the c-axis. Based on the experimental results, growth mechanisms for the formation of ZnO structures were proposed. We believe this synthetic route will be of guidance to prepare several materials whose shapes will depend on the desired applications.
In this work, we report on a single-pot synthesis route based on a polymeric precursor method used for successfully producing undoped and iron-doped CeO2 nanoparticles with iron contents up to 10.0 mol. %. The formation of high-crystalline nanoparticles with a cubic fluorite structure is determined for all the studied samples. Meanwhile, the magnetic measurements of the undoped ceria nanoparticles revealed the occurrence of ferromagnetism of bound magnetic polarons of a fraction of Ce3+ at room temperature, and only a paramagnetic behavior of Fe3+ ions was determined for Fe-doped ceria nanoparticles. A monotonous reduction of the effective magnetic moment of the Fe3+ ions was determined. It suggests a change from a high-spin to low-spin state of Fe ions as the Fe content is increased. The 3+ valence state of the iron ions has been confirmed by the Fe K-edge X-ray absorption near-edge structure (XANES) and Mössbauer spectroscopy measurements. X-ray photoelectron spectroscopy data analysis evidenced a coexistence of Ce3+ and Ce4+ ions and a decreasing tendency of the relative fraction of Ce3+ ions in the surface region of the particles as the iron content is increased. Although the coexistence of Ce3+ and Ce4+ is confirmed by results obtained via Ce L3-edge XANES measurements, any clear dependence of the relative relation of Ce3+ ions on the iron content is determined, suggesting a homogeneous distribution of Ce3+ and Ce4+-ions in the whole volume of the particles. Ce L3-edge extended X-ray absorption fine structure revealed that the Ce-O bond distance shows a monotonous decrease as the Fe content is increased, which is in good agreement with the shrinking of the unit cell volume with the iron content determined from XRD data analysis, reinforcing the substitutional solution of Ce and Fe ions in the CeO2 matrix.
We report on the study of the structural and magnetic properties of crystalline Fe-doped ZnO nanoparticles with Fe content up to 10% synthesized by a co-precipitation method. The Rietveld analysis indicates that the Fe-doped ZnO nanoparticles are formed in a single phase wurtzite structure. DC magnetization (M) vs. applied magnetic field (H) curves obtained at 5 K show the occurrence of a ferromagnetic behavior. The coercive field and saturation magnetization depend on the Fe content. At room temperature, M vs. H curves show features consistent with a superparamagnetic state of nanoscale system. The temperature dependence of the AC and DC magnetic susceptibilities show features related to the thermal relaxation of the nano-sized particles. From the AC data analysis, a magnetic transition from the superparamagnetic to cluster-glass state is determined.
29 October 2014 in Journal of Low Temperature Physics
Zinc oxide (ZnO) nanostructures with different sizes and morphologies were synthesized using the Controlled Precipitation Method. It follows a standard process, but with different synthesis and washing solvents to modify the features related to the photocatalytic activity. The solid phase evolution during aging step was followed using Infrared Spectroscopy (FTIR) and the solids obtained, after the washing process, were characterized using X-ray diffraction (XRD). The Rietveld refinement indicates a Wurtzite phase (space group P63mc) as majority phase with lattice parameters a = 3.2530 Å and c = 5.2125 Å. Scanning electron microscopy (SEM) image shows a sponge-like morphology for the sample synthesized with ethylene glycol as solvent, acidified with nitric acid and washed with water. The sample synthesized and washed with water shows a needle-like morphology; and the sample synthesized in acetic acid and washed with water shows particles with undefined morphology. The optical properties of the as-prepared ZnO samples were investigated by UV-vis absorption spectroscopy. Finally, the photocatalytic activity of ZnO powders was studied from the initial rate of decomposition of H2O2 in aqueous solution. The best results were obtained with samples synthesized and washed with water; the influence of all the solvents on the morphology of ZnO samples and the effect of the morphologies on the photocatalytic activity are discussed.