In tunnel construction, predicting the roughness of discontinuity is significant for preventing the collapse of the excavation face. However, currently, we are unable to use a parameter with invariant properties to quantify and predict the roughness of discontinuity. Fractal dimension D is one such parameter that be used to characterize the roughness of discontinuity. The study proposes a new method to predict the roughness of discontinuity from the fractal dimension D of outcrops. The measurement method of the coordinates of outcrops is firstly summarized, and the most suitable method of calculating fractal dimension D is then provided. For characterizing the spatial variability of fractal dimension D, the random field of fractal dimension D is discretized, and the prediction model is then established based on Bayesian theory. The proposed method is applied to one tunnel for predicting the roughness of discontinuity, and the results indicate that the relative errors of prediction are less than 1.5%. The sensitivities of correlation function and discontinuity size are analyzed. It is found that the different correlation functions have no obvious effect on the prediction results, and the proposed method is well applied to relatively large sizes of discontinuity.
The integrity index Kv is the quantitative index in the CHN-BQ method, which can be determined by the acoustic wave test, volume joint number Jv, or empirical judgment. However, these methods are not convenient and require the practitioner to have extensive experience. In this study, a new quantitative evaluation of Kv is proposed to determine Kv accurately and conveniently. A method for determining the fractal dimension D based on the structural plane network simulation is proposed. A quantitative relationship between fractal dimension D and integrity index Kv is established based on the geological information from 80 sampling windows in Mingtang Tunnel. To further consider the effect of structural plane conditions on Kv, a BP neural network is constructed with the fractal dimension D and structural plane condition index R3 as input and Kv as output. The BP neural network is trained by 260 groups of tunnel data and validated by 39 groups of test data. The results show that the correlation coefficient R2 between the predicted Kvp and measured Kvm is 0.93, and the average relative error is 7.51%. In addition, the predicted Kvp from the 39 groups of data is compared with the Kvd determined directly by fractal dimension D. It can be found that the Kvd has a larger error compared with the Kvp, especially in the case of a Kv less than 0.5. Finally, the BP neural network for predicting Kv is applied to the Jiulaopo Tunnel. The maximum relative error between the measured Kvm and the predicted Kvp is 5.13%, and the average relative error is 2.71%. The BP neural network is well trained and can accurately predict Kv based on the fractal dimension D and the structural plane condition index R3.
Offshore wind power is a new trend in renewable energy development. However, during the operation of offshore wind turbines, the rock-socketed monopile foundation is subjected to long-term cyclic loads, which will cause the seawater to erode the rock around the monopile foundation and reduce the ultimate end-bearing capacity. There is no suitable rock mass classification for evaluating the quality of marine bedrock and no theoretical method for accurately calculating the ultimate end-bearing capacity of the monopile foundation. Therefore, based on the existing rock mass classification, an ocean rock mass classification (OMR) that is applicable to marine bedrock is proposed. The ratings of four geological indices (R1, R2, R3, and R4) in the OMR classification are reset by the analysis hierarchy process and modified according to the geological conditions of marine bedrock. Then, an accelerated test of seawater erosion is used over 60 days to simulate seawater erosion for up to 12 years to determine the adjustment factor for the effect of time, Ft, in the OMR classification. Based on the OMR classification, a theoretical calculation method of the ultimate end-bearing capacity of the offshore wind monopile foundation under the overall sliding failure mode of rock mass is proposed. The theoretical calculation method was employed for offshore wind engineering, and the reliability of the theoretical calculation and three-dimensional numerical simulation was validated. The results show that the theoretical and numerical results for the ultimate end-bearing capacity without seawater erosion are similar to the measured results, with a relative error of less than 9%. The theoretical results are always larger than the numerical results, with a relative error of less than 7%. Finally, the theoretical and numerical results were used to guide the design and construction of an offshore wind turbine. The offshore wind turbine has been operating for 8 years, and its displacement is 15.3 mm, which is less than the numerical result of 16.94 mm.