Sensitivity of reservoir properties to broadband seismic amplitudes can be weak, which makes interpretation ambiguous. Examples of challenging interpretation scenarios include distinguishing blocky reservoirs from fining sequences, low gas saturation from high gas saturation, and variable reservoir quality. Some of these rock and fluid changes might indicate stronger sensitivity to amplitudes over narrow frequency bands, which is a characteristic of frequency-dependent amplitude variation with offset (FAVO). We have developed a FAVO model for reservoir characterization, following a seismic scattering phenomenon through a set of isotropic elastic layers. The frequency dependency in our model comes from the time delays due to wave propagation within layers. The FAVO modeled response is a complex-valued amplitude varying with angle and frequency, and it is a function of the seismic velocities and thicknesses of individual layers, along with the conventional AVO response at all interfaces. Our FAVO seismic analysis consists of two main steps: (1) forward modeling using well logs to understand rock and fluid sensitivity to amplitudes to identify tuning frequencies with maximum amplitude excursions and (2) seismic analysis at tuning frequencies. With well-log models, we observed that the frequency-dependent tuning response is primarily dependent on the lithology stacking pattern of a reservoir; in the cases studied, the fluid and reservoir quality have secondary effects on the frequency dependence of the amplitudes. We evaluate synthetic models and field data from the Columbus Basin, Trinidad, to illustrate our frequency-dependent seismic analysis methods. For one of the sandstone reservoirs, a frequency-dependent attribute indicates better spatial resolution of the anomaly than a conventional amplitude extraction. FAVO attributes are complementary to conventional AVO attributes.
Full-waveform inversion (FWI) processing provides an improved and higher-resolution velocity model. This study focuses on how to use FWI products in seismic interpretation. One such product is FWI-derived reflectivity (FDR), which often has better illumination than migrated seismic images. We want to go beyond structural interpretation and utilize FDR data in reservoir characterization (e.g., fault imaging, resolution, and amplitude fidelity). FWI can be performed up to the maximum frequency available in the input seismic data. However, in the case of our study area in offshore Trinidad, the FDR data set is based on acoustic FWI with frequency only up to 10 Hz. While comparing amplitude extractions from full-stack and FDR data, we observe complementary amplitude distribution. Similar complementary information is found when we decompose the data in frequency bands (higher-frequency migrated seismic data and lower-frequency FDR data). We discuss the integration of the FDR volume in seismic interpretation with data examples. We combine FDR data with full-stack seismic data in two ways to generate new attributes for reservoir mapping and to reduce vertical and lateral uncertainty.
Commercial and low-saturation gas (also called paleoresidual gas [PRG]) show similar strong amplitude signatures on P-wave seismic data. This poses an exploration risk in gas reservoir regions. However, density correlates inversely with gas saturation and can differentiate a zone of full gas saturation from PRG. This can improve the chances of success in terms of predrill prediction of gas saturation. Amplitude-variation-with-offset (AVO) inversion using prestack seismic data is the most commonly used technique that can estimate elastic parameters such as P-wave velocity, S-wave velocity, and density. Out of these three parameters, extracting density from seismic data is the most challenging due to its weak sensitivity to seismic reflection amplitude and the lack of good quality seismic data at far offsets. However, with recent improvements in seismic data acquisition and processing technology, which produces reliable AVO gathers, density estimates have improved. This requires that strong density sensitivity to AVO exists. Note that multiple density models may fit the data equally well. Therefore, quantifying uncertainty is crucial for interpretation and risk assessment. We apply a recently developed stochastic approach based on the Bayesian framework to solve the problem in a transdimensional framework, where the number of model parameters is treated as a variable and estimated along with the elastic properties. We use the reversible jump Hamiltonian Monte Carlo (RJHMC) algorithm to sample models from a variable dimensional model space and obtain a globally optimum model and uncertainty estimates. We use a synthetic and good quality real data set from Columbus Basin in Trinidad, which has a proven gas reservoir, to demonstrate the algorithm. The RJHMC results calibrate well with the logs and show the areal extents of the density anomalies within the 3D volume.
A method for generalizing the conventional amplitude variation with offset model from an isolated interface to a scattering reservoir interval is presented. The advantage of this new method is that it can provide enhanced detection of subtle reservoir and pore fluid properties. First- and second-order expressions for the reflected compressional wave energy from a specified heterogenous interval are given. These expressions are applied to two problems of interest for reservoir description. One application is discriminating low versus higher saturations of hydrocarbons, and the other is detecting the extent of vertical stratification within a reservoir. The first-order expression is used for determining hydrocarbon saturations, and the second-order expression is used for detecting the magnitude of fine-scale layering within a reservoir. Synthetic models and field data examples are used in demonstrating the applicability of the proposed method.
“The future lies with those companies who see the poor as their customers.” C. K. Prahalad There was a time when a rural consumer used to travel longer distance to consume particular branded goods and services. Only selected consumers consumed branded goods and services. But due to globalization the scenario has been changed. Now a customer is king and due to the economy, he/she prefers branded goods and services which give more value. Before globalization only big companies were able to capture the rural market to establish their brands and services. But in the present scenario the rural market is very critical for every marketer whether FMGG, IT or automobile brands. Women are the world's most powerful consumers. They are big spender, when we are talking about household items, corporate purchasing, or small business. This is not happening only in the urban but also in rural market. In the past, men used to take the decision to purchase any goods or services but now scenario has changed and mostly decisions are taken by rural women. The rural women are very sensitive and careful regarding their purchasing process. So marketers must know the perception and mindset of the rural women for survival of their products in the rural market.
A one-day postconvention workshop held during the 2018 SEG Annual Meeting in Anaheim, California, focused on seismic attenuation model building and compensation through imaging in the morning and on frequency-dependent seismic interpretation and rock physics in the afternoon. The workshop was organized by Dhananjay Kumar (BP), Yi Shen (Shell), Kui Bao (Shell), Mark Chapman (University of Edinburgh), Doug Foster (The University of Texas at Austin), Wenyi Hu (Advanced Geophysical Tech Inc.), and Tieyuan Zhu (Pennsylvania State University). The main topics discussed were: attenuation and Q model building using seismic, vertical seismic profiling, well-log and core data, seismic attenuation compensation, rock-physics modeling, seismic modeling, and frequency-dependent seismic interpretation.