14 December 2024 in Electrochimica Acta
29 March 2024 in Industrial & Engineering Chemistry Research
5 February 2025 in Industrial & Engineering Chemistry Research
9 October 2022 in ECS Meeting Abstracts
The development of an electrochemical catalyst system that converts carbon dioxide (CO2) to high-value chemicals, such as formic acid (FA) will simultaneously curb CO2 emissions to atmosphere and provide sustainable pathways to create a range of fuels at lower cost. Electrochemical conversion of CO2 to FA is a two-electron reduction process and can be carried out at ambient conditions, and the reduced product has been found wide-ranging applications in chemical industries for production of household products, and a safe liquid-phase chemical for hydrogen storage. Synergistic bimetallic electrocatalysts can improve the activity and selectivity over their monometallic counterparts by tuning the structure, morphology, and composition. At the University of Kentucky’s Institute for Decarbonization and Energy Advancement (UK IDEA), our enhanced bimetallic oxide carbon utilization (EBOCU) process uses an engineered catalyst that facilitates operating at relatively low applied potentials, and high product selectivity to produce FA. Using bimetallic tin-copper oxide containing 95 mol% of Sn and 5 mol% of Cu immobilized on mesoporous carbon xerogel and alkaline electrolyte, we observed that hydrogen evolution reaction is suppressed and the selectivity towards formate is enhanced for the cell potential from 3.6 V through 4.0 V. Notably, our electrochemical reactor is successful in converting CO2 to formate at the rate of 2 mM/h in 3 mL/min flow system. Maximum faradaic efficiency of 94% is achieved towards formate at 3.8 V, which remained above 80% even after 200 h of continuous operation.
9 October 2022 in ECS Meeting Abstracts
Electrocatalytic carbon dioxide reduction reaction (CO2RR) technology can simultaneously minimize the CO2 concentration in the atmosphere and generate useful chemicals and fuels. Liquid formic acid (FA) produced from CO2RR is a chemical feedstock for industrial purposes as well as a potential hydrogen storage medium. The downstream separation of liquid FA from the CO2RR effluent increases the total costs in addition to the electrolysis and can also affect the environment adversely. Therefore, efficient, low-cost, and environmentally benign technologies for FA separation from the CO2RR are important for life cycle analysis and techno-economic analysis for this technology. Ion exchange has been proven as an advanced process for FA separation from aqueous solution. This method has attractive due to its high selectivity, low cost, ease of operation and recovery, availability to integrate with other systems, and environmentally benign nature. In this work, three anion exchange resins: Ambersep 900 hydroxide, Amberlite IRA-96 free base, and Amberlite IRA-910 chloride forms have been tested to separate FA from the aqueous solution under varying resin loading (10-60 mg/mL) and initial FA concentration (0.05-0.50 M). The effect of potassium bicarbonate, a commonly used catholyte in electrochemical CO2RR on equilibrium FA adsorption capacity has been investigated with resin loading of 10 and 60 mg/mL under similar initial FA concentrations. Kinetics and equilibrium studies data for the FA adsorption on three resins are interpreted using several kinetics and isotherm models. The kinetics data fits better with pseudo first order at high initial FA concentration and pseudo second order at low initial FA concentration. The results show that the Ambersep 900 hydroxide form with adsorption capacity of 430.8 mg of FA per g of resin is more efficient than the Amberlite IRA-96 free base form (369.9 mg/g) and Amberlite IRA-910 chloride form (291.2 mg/g) in the absence of potassium bicarbonate in the range of parameters studied. However, Amberlite IRA-96 (153.4 mg/g) and Amberlite IRA-910 (143.4 mg/g) can separate FA more efficiently from the potassium bicarbonate aqueous solution than the Ambersep 900 (94.1 mg/g). The experimental data for all resins can be well explained with the Freundlich isotherm model. In the presence of potassium bicarbonate, competitive adsorption of bicarbonate and formic acid reduces the FA adsorption capacity of resins. Experimental and modeling results will be discussed.