25 December 2017 in IEEE Transactions on Industrial Informatics
Recycling automotive, electronic, and other end-of-life waste liberates large quantities of metals, which can be returned to the supply chain. Sorting the nonferrous metals, however, is not straightforward. Common methods range from laborious hand-sorting to expensive and environmentally deleterious wet processes. The goal is to move toward dry processes, such as induction sensors and vision systems, which can identify and sort nonferrous scrap efficiently and economically. In this paper, we present a new classification method using magnetic induction spectroscopy (MIS) to sort three high-value metals that make up the majority of the nonferrous fraction-copper, aluminum, and brass. Two approaches are investigated: the first uses MIS with a set of geometric features returned by a vision system, where metal fragments are matched to known test pieces from a training set. The second approach uses MIS only . A surprisingly effective classifier can be constructed by combining the MIS frequency components in a manner determined by how eddy currents circulate in the metal fragment. An average precision and recall (purity and recovery rate) of around 92% was shown. This has significant industrial relevance, as the MIS-only classifier is simple, scalable, and straightforward to implement on existing commercial sorting lines.
1 June 2014 in Journal of Magnetism and Magnetic Materials
16 October 2013 in Journal of Magnetism and Magnetic Materials
Analysis of the electromagnetic (EM) properties of power station steels, measured using a non-contact magnetic sensor, is of significance as such properties are indicative of the microstructure of the material and can be potentially exploited for non-destructive testing. In this paper, we present EM measurements of cylindrical power station steel samples (P9 and T22 grades) with different microstructures: normalised and tempered (representative of the initial condition), as normalised and after service exposure. In order to obtain the magnetic properties the B–H curves of these samples were measured. Cylindrical air-cored and printed circuit board (PCB) coil integrated sensors were used to measure the incremental permeability. Analytical and numerical methods (Finite Elements Methods) were employed to calculate the sensor response of these samples. The electromagnetic properties of the different steels were inferred by fitting the finite element models to the measured results. In addition, sensitivity and error analysis were carried out to evaluate the accuracy of the method.
7 July 2012 in NDT & E International
1 July 2016 in Advanced Composites Letters
The wind turbine is playing an increasingly important role in the generation of green electricity. The structural integrity and maintenance of the wind turbine blade is a critical issue in service due to the harsh operating environments. In this paper, the delamination in glass fibre composite joints of a wind turbine blade is detected using the non-contact microwave imaging with an open-ended waveguide. The existence and extent of the delaminated region could be found from the generated images. Thickness variation and the presence of the web can be identified as well. The optimum inspection frequency range is investigated, which offers a reference for future applications. By comparison, the phase profiling provided by the scanning shows better performance for the delamination detection rather than the magnitude profiling.
30 October 2025 in IEEE Access
The challenge of optimally allocating transmit power among multiple beams remains a central problem in multi-beam beamforming for massive MIMO networks, especially as user density and interference become increasingly dynamic in next-generation wireless deployments. Conventional normalization techniques, such as Global and Per-Beam Normalization, are unable to adapt to varying channel conditions and user demands, often resulting in inefficient power distribution and limited system performance. To address this, we propose Power Redistribution Normalization (PRN), a novel approach that dynamically reallocates transmit power across multiple beams in real time, optimizing both desired signal peaks and interference nulls. The PRN framework is integrated with diverse beamforming algorithms—including Least Mean Square (LMS), Minimum Variance Distortionless Response (MVDR), Recursive Least Squares (RLS), Zero Forcing (ZF), and Sample Matrix Inversion (SMI)—and is evaluated under realistic antenna configurations, user densities, and interference scenarios. Results demonstrate that PRN-MVDR achieves the highest spectral efficiency (~25 bps/Hz), SINR (~8.7 dB), and energy efficiency (~25 bps/Hz/W) compared to existing normalization methods. Moreover, PRN-LMS provides comparable performance with significantly lower computational complexity (~0.4 ms latency), making it attractive for real-time and hardware-constrained applications. The proposed PRN method is thus well-suited for dense urban 5G/6G networks and large-scale IoT deployments, where robust power allocation and interference management are critical to system capacity and reliability.