The purpose of the present paper is to investigate the mechanical behavior of mild steel at quasi-static (0.001 s−1) and different rates of dynamic tensile (5–750 s−1) and compressive (125–2,350 s−1) strain rates. Quasi-static experiments are conducted on a universal testing machine to study the stress-strain behavior of mild steel. A hydropneumatic machine and a modified Hopkinson bar are used to investigate the dynamic tensile behavior of mild steel specimens at medium and high strain rates, respectively, whereas the specimens are tested on a split Hopkinson pressure bar to acquire understanding of the strain rate sensitivity of mild steel under dynamic compression. The effects of a pulse shaper and gauge length of the specimen in the dynamic compression tests are investigated. High-speed photography has been used to monitor the deformation of the specimen at high strain rate experiments. The applicability of the existing Cowper-Symonds and Johnson-Cook material models to represent the mechanica...
1 March 2023 in International Journal of Impact Engineering
An experimental investigation on the tensile behavior of Complex Phase 800 (CP800) steel at different strain rates (0.001 to 750 s−1) is reported here. The material is tested on a ZWICK universal testing machine to obtain the stress-strain relationship under quasi-static condition, and on a Hydro-Pneumatic machine and modified Hopkinson bar to study the mechanical behavior at medium and high strain rates, respectively. The failure surfaces of the tested specimens at different strain rates are studied from their fractographs. Finally, the applicability of the existing Cowper-Symonds and Johnson-Cook material models to represent the mechanical behavior of CP800 is examined.