15 September 2007 in Journal of Applied Physics
In this study, sputtered undoped and nitrogen doped (ST and STN) films were systematically investigated by x-ray diffraction (XRD) and resistance measurements. Their application to lateral phase-change memory (PCM) is presented as well. The STN film sputtered at a flow rate ratio of 0.07 proved to have both high stability and low power consumption, implying its high performance in PCM applications. In the STN films , the hexagonal Te phase first appeared at , and then the orthorhombic SbN phase appeared at . The phase separation made it very difficult for these films to switch reversibly between the crystalline and the amorphous phase.
11 March 2013 in ACS Nano
1 August 2006 in Japanese Journal of Applied Physics
1 August 2005 in Japanese Journal of Applied Physics
We studied the electrical properties of 20- and 50-nm-thick Ge2Sb2Te5 and AgInSbTe films for nonvolatile lateral transistor memory devices. Both kinds of thin films were prepared as film samples and device samples which were then annealed at temperatures from 140 to 415°C. It is known that crystal size can be effectively reduced with film thickness on the basis of X-ray diffraction analysis. The resistances of all film samples annealed at 140–415°C decreased by approximately 5–6 orders of magnitude. In the case of device samples, however, the source-drain resistances of Ge2Sb2Te5 samples were first reduced and then reversely increased and it seemed that the resistances of AgInSbTe samples did not drop. The abnormal resistance increase above the crystallization temperature may be caused by phase change and thermal expansion, as we analyzed in this paper. Finally, the resistance changes of device samples with channel lengths in the range of 0.4–3 µm were discussed from the point of view of miniaturizing the phase change memory device.
1 July 2006 in Japanese Journal of Applied Physics
1 December 2007 in Microelectronic Engineering