A new approach to an efficient and selective extraction of Cs+ ions from water, sea water enriched with Cs+ and a radioactive solution simulating the effluents of the Fukushima reactors (137Cs, 29 kBq L−1) was developed by using porous silica- or glass-based nanocomposites containing Prussian blue type nanoparticles, Co2+/[Fe(CN)6]3−, with sizes below 10 nm. A particular emphasis is given on the kinetics of cesium sorption fitted by using the classical reaction order model as well as a diffusion model in order to better understand the sorption mechanism. Compared to the amount of Co2+/[Fe(CN)6]3− nanoparticles, the sorption capacities of studied nanocomposites are more than three times higher than the ones observed for the respective bulk materials. These nanocomposites present a high selectivity to Cs+ and extract it in trace amounts.
Five metal-potassium hexacyanoferrate/chitin composites (based on Cu, Ni, Zn, Co or Fe co-metal) have been prepared and characterized, using SEM-EDX, TEM, X-ray diffraction and FT-IR, before being compared for Cs(I) and 137Cs(I) sorption. The Zn-ion exchanger was characterized by a much larger crystal size of about 250 nm compared with a few tens of nm for other ion-exchangers. The ion-exchangers are well distributed in the whole mass of the composite and they are fully accessible to Cs(I), as evidenced by Cs(I) distribution after metal sorption. Uptake kinetics can be modeled using both the pseudo-second order rate equation and the Crank equation (resistance to intraparticle diffusion coefficient). Sorption isotherms showed substantial differences in the sorbents that can be ranked as Cu > Ni > Zn > Co > Fe. However, based on 137Cs Kd values, the sorbents can be ranked as Co ≫ Fe ≫ Cu ≫ Ni > Zn. Taking into account the cost and toxicity of metals (both in terms of manufacturing and potential metal release) a Prussian Blue based sorbent (i.e., iron-potassium hexacyanoferrate/chitin composite) sounds to be a good composite for Cs(I) recovery from radionuclide-containing effluents.
1 August 2012 in Separation and Purification Technology