State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China
Auto-generated profile, based on publicly available information
Yao Lu
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China
Flexible wearable sensors are actively used in the fields of sensing skin, human motion detection and healthcare monitoring. However, most wearable sensors generally suffer from poor mechanical properties, low sensitivity and single detection function. Here, a multifunctional flexible Dual-SF sensor with ultra-high sensitivity and a wide detection range for stretch and pressure is reported based on silicone rubber foam and a dual interconnected conductive network. The resultant Dual-SF sensor has a high sensitivity (gauge factor (GF) up to 690.76 and pressure sensitivity (S) up to 169.94 kPa−1), low detection limit (0.2% strain and 1.274 Pa pressure) and excellent durability, and is able to detect both weak and large movements of the human body. On this basis, large-area meshed sensors and sensor arrays were fabricated by hollow design and multiple flexible sensor integration, respectively, for detecting muscle group contractions and the spatial distribution of pressure. Additionally, the Dual-SF/LSR sensor prepared by backfilling pores with liquid silicone rubber (LSR) has a high temperature coefficient of resistance (TCR, 0.01621 °C−1) and realizes application in skin and machine temperature measurements. These superior properties lay a foundation for the application of Dual-SF in the fields of human motion detection, health monitoring and electronic skin.
Flexible pressure sensors have a wide range of applications in motion monitoring, human–computer interaction, and other fields. In this study, we designed and prepared a 3D printable flexible electronic composite called modified cellulose nanofibers/carbon nanotube/silicone rubber (MCNF/CNT/SR). This composite was created by adsorbing cellulose nanofibers onto carbon nanotubes in a solution, which offered a new approach for uniformly incorporating nano-compounds into the SR matrix. To fabricate the flexible strain sensor, we used this composite as ink by a commercial direct writing 3D printer for layer deposition. By surface silanization of cellulose nanofibers (CNFs), we improved the interface compatibility between modified cellulose nanofibers (MCNFs), carbon nanotubes (CNTs), and the silicone rubber (SR) matrix, thereby enhancing the mechanical properties of the nanohybrid polymer network. This synergistic effect enabled MCNF/CNT/SR elastomers to exhibit remarkable tensile strength (2.97 MPa) and elongation (>250%) while maintaining high conductivity (0.086 S m−1). The incorporation of MCNF–CNT hybrid significantly improved the rheological properties of SR composites and endowed them with excellent thixotropic properties. Furthermore, the presence of CNTs provided MCNF/CNT/SR sensing materials with high sensitivity (maximum gauge factor (GF) = 64.32), a wide strain range (∼300%), and exceptional stability. These flexible sensors have been successfully utilized for monitoring human movements.
21 June 2022 in ACS Applied Materials & Interfaces
A self-free-standing core-sheath structured hybrid membrane electrodes based on nickel and nickel based metal-organic complexes (Ni@Ni-OC) was designed and constructed for high volumetric supercapacitors. The self-standing Ni@Ni-OC film electrode had a high volumetric specific capacity of 1225.5 C cm −3 at 0.3 A cm −3 and an excellent rate capability. Moreover, when countered with graphene-carbon nanotube (G-CNT) film electrode, the as-assembled Ni@Ni-OC//G-CNT hybrid supercapacitor device delivered an extraordinary volumetric capacitance of 85 F cm −3 at 0.5 A cm −3 and an outstanding energy density of 33.8 at 483 mW cm −3 . Furthermore, the hybrid supercapacitor showed no capacitance loss after 10 000 cycles at 2 A cm −3 , indicating its excellent cycle stability. These fascinating performances can be ascribed to its unique core-sheath structure that high capacity nano-porous nickel based metal-organic complexes (Ni-OC) in situ coated on highly conductive Ni wires. The impressive results presented here may pave the way to construct s self-standing membrane electrode for applications in high volumetric-performance energy storage.
5 September 2024 in ACS Biomaterials Science & Engineering