Ruihai Tong

Ruihai Tong

Auto-generated profile, based on publicly available information

Ruihai Tong

Southwestern Institute of Physics 1 , Chengdu 610041, China

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2016 in Plasma Physics and Controlled Fusion
Verified
Journal Article
Closed access
PDF file
SWS Y Wang
S Y Wang
ZCZ Y Chen
Z Y Chen
DHD W Huang
D W Huang
RTR H Tong
R H Tong
WYW Yan
W Yan
GZG Zhuang
G Zhuang
Disruption mitigation is essential for the next generation of tokamaks. The prediction of plasma disruption is the key to disruption mitigation. A neural network combining eight input signals has been developed to predict the density limit disruptions on the J-TEXT tokamak. An optimized training method has been proposed which has improved the prediction performance. The network obtained has been tested on 64 disruption shots and 205 non-disruption shots. A successful alarm rate of 82.8% with a false alarm rate of 12.3% can be achieved at 4.8 ms prior to the current spike of the disruption. It indicates that more physical parameters than the current physical scaling should be considered for predicting the density limit. It was also found that the critical density for disruption can be predicted several tens of milliseconds in advance in most cases. Furthermore, if the network is used for real-time density feedback control, more than 95% of the density limit disruptions can be avoided by setting a proper threshold.

1 October 2018 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
YLY. Li
Y. Li
ZCZ. Y. Chen
Z. Y. Chen
YWY. N. Wei
Y. N. Wei
RTR. H. Tong
R. H. Tong
WYW. Yan
W. Yan
ZJZ. H. Jiang
Z. H. Jiang
Disruptions have the possibility of causing severe wall damage to large tokamaks like ITER. The mitigation of disruption damage is essential to the safe operation of a large-scale tokamak. The shattered pellet injection (SPI) technique, which is regarded as the primary injection method for ITER, presents several advantages relative to massive gas injection, including more rapid particle delivery, higher total particle assimilation, and more centrally peaked particle deposition. A dedicated argon SPI system that focuses on disruption mitigation and runaway current dissipation has been designed for the Joint Texas Experimental Tokamak (J-TEXT). A refrigerator is used to form a single argon pellet at around 64 K. The pellet will be shaped with a 5 mm diameter and a 1.5-10 mm length. Helium gas at room temperature will be used as a propellant gas for pellet acceleration. The pellet can be injected with a speed of 150-300 m/s. The time interval between injection cycles is about 8 min. The pellet will be shattered at the edge of the plasma and then injected into the core of plasma. The first experiments of SPI fast shutdown and runaway current dissipation have been performed.

5 October 2021 in Nuclear Fusion
Verified
Journal Article
Closed access
PDF file
YLYou Li
You Li
WYWei Yan
Wei Yan
YWY.N. Wei
Y.N. Wei
RTRuihai Tong
Ruihai Tong
ZLZhifang Lin
Zhifang Lin
TTthe J-TEXT Team
the J-TEXT Team
The mitigation of disruption damage is essential to the safe operation of a large-scale tokamak. In order to achieve the safe operation of ITER, the shattered pellet injection (SPI) has been considered as a primary measure on disruption mitigation. A dedicated argon SPI system, focusing on disruption mitigation has been designed for the J-TEXT tokamak. In the J-TEXT SPI system, a pure argon pellet can be formed in the freezing tube, then separated from the tube and accelerated by a punch mechanism. The pellet can be injected with a speed of 150-300 m/s. The performance of disruption mitigation by Ar SPI has been compared with Ar massive gas injection (MGI). The cooling process observed from the ECE indicates that the SPI has deeper deposition, with the cold front that can reach the q=1 rational surface in case of SPI, but stops at the q=2 profile in MGI. The increase of core plasma density during a fast shutdown is higher than that with Ar MGI, which proves a deeper penetration of SPI. In disruption, the Magnetohydrodynamic (MHD) activities, measured at mirnov coils, have similar behavior in both MGI and SPI shots. The m/n = 2/1 mode dominates the MHD activities from the penetration to the end of TQ. Subsequently, in the CQ phase, the m/n=3/1 mode grows to become the dominant mode. The radiation power is much stronger in the SPI shot. The radiation asymmetry is compared in two plasma disruption mitigation methods. Changing the pellet velocity can effectively adjust the TQ process and CQ rate, which can achieve a higher impurity assimilation rate when the pellet velocity increases in a certain range.

21 May 2021 in Plasma Physics and Controlled Fusion
Verified
Journal Article
Closed access
PDF file
YZYu Zhong
Yu Zhong
WZWei Zheng
Wei Zheng
ZCZ Y Chen
Z Y Chen
FXF Xia
F Xia
LYLiming Yu
Liming Yu
JTJ-Text Team
J-Text Team
Using machine learning (ML) techniques to develop disruption predictors is an effective way to avoid or mitigate the disruption in a large-scale tokamak. The recent ML-based disruption predictors have made great progress regarding accuracy, but most of them have not achieved acceptable cross-machine performance. Before we develop a cross-machine predictor, it is very important to investigate the method of developing a cross-tokamak ML-based disruption prediction model. To ascertain the elements which impact the model’s performance and achieve a deep understanding of the predictor, multiple models are trained using data from two different tokamaks, J-TEXT and HL-2A, based on an implementation of the gradient-boosted decision trees algorithm called LightGBM, which can provide detailed information about the model and input features. The predictor models are not only built and tested for performance, but also analyzed from a feature importance perspective as well as for model performance variation. The relative feature importance ranking of two tokamaks is caused by differences in disruption types between different tokamaks. The result of two models with seven inputs showed that common diagnostics is very important in building a cross-machine predictor. This provided a strategy for selecting diagnostics and shots data for developing cross-machine predictors.

1 August 2014 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
YLY. H. Luo
Y. H. Luo
ZCZ. Y. Chen
Z. Y. Chen
YTY. Tang
Y. Tang
SWS. Y. Wang
S. Y. Wang
WBW. G. Ba
W. G. Ba
GZG. Zhuang
G. Zhuang
In order to mitigate the negative effects of the plasma disruption a massive gas injection (MGI) valve is designed for the joint Texas experimental tokamak. The MGI valve is based on the eddy-current repulsion mechanism. It has a fueling volume of 30 ml. The piston of the MGI valve is made by non-ferromagnetic material, so it can be installed close to the vacuum vessel which has a strong toroidal magnetic field. A diode is use to prevent current oscillation in the discharge circuit. The drive coil of the valve is installed outside the gas chamber. The opening characteristics and the gas flow of the MGI valve have been tested by a 60 l vacuum chamber. Owing to the large electromagnetic force the reaction time of the valve is shorter than 0.3 ms. Duration for the opening of the MGI valve is in the order of 10 ms.

22 June 2018 in Nuclear Fusion
Verified
Journal Article
Open access
PDF file
ZCZ.Y. Chen
Z.Y. Chen
ZLZ.F. Lin
Z.F. Lin
DHD.W. Huang
D.W. Huang
RTR.H. Tong
R.H. Tong
QHQ.M. Hu
Q.M. Hu
JTJ-Text Team
J-Text Team