20 April 2021 in Journal of Applied Physics
The use of a particle-in-cell (PIC) algorithm with an explicit scheme to model low temperature plasmas is challenging due to computational time constrains related to resolving both the electron Debye length in space and the inverse of a fraction of the plasma frequency in time. One recent publication [Ricketson and Cerfon, Plasma Phys. Control. Fusion 59, 024002 (2017)] has demonstrated the interest of using a sparse grid combination technique to accelerate the explicit PIC model. Simplest plasma conditions were considered. This paper is the demonstration of the capability and the effectiveness of the sparse grid combination technique embedded in the PIC algorithm (hereafter called “sparse PIC”) to self-consistently model capacitively coupled radio frequency discharges. For two-dimensional calculations, the sparse PIC approach is shown to accurately reproduce the plasma profiles and the energy distribution functions compared to the standard PIC model. The plasma parameters obtained by these two numerical methods differ by less than 5%, while a speed up in the executable time between 2 and 5 is obtained depending on the setup.
20 April 2021 in Journal of Applied Physics
Three-dimensional simulations of partially magnetized plasma are real challenges that actually limit the understanding of the discharge operations such as the role of kinetic instabilities using explicit Particle-In-Cell (PIC) schemes. The transition to high performance computing cannot overcome all the limits inherent to very high plasma densities and thin mesh sizes employed to avoid numerical heating. We have applied a recent method proposed in the literature [L. F. Ricketson and A. J. Cerfon, Plasma Phys. Controlled Fusion 59, 024002 (2017)] to model low temperature plasmas. This new approach, namely, the sparse grid combination technique, offers a gain in computational time by solving the problem on a reduced number of grid cells, hence allowing also the reduction of the total number of macroparticles in the system. We have modeled the example of the two-dimensional electron drift instability, which was extensively studied in the literature to explain the anomalous electron transport in a Hall thruster. Comparisons between standard and sparse grid PIC methods show an encouraging gain in the computational time with an acceptable level of error. This method offers a unique opportunity for future three-dimensional simulations of instabilities in partially magnetized low temperature plasmas.
17 August 2018 in IEEE Transactions on Plasma Science
An experimental study of a high-current vacuum arc generated between two static CuCr25 contacts spaced 20 or 30 mm apart was conducted to characterize the arc appearance and the cathode spot (CS) distribution. The arc was ignited from the lateral surface of the cathode and controlled using an external axial magnetic field. Under the investigated experimental conditions, three distinct arc modes have been observed: multiple arc, diffuse, and diffuse columnar modes. The latter appeared at low $B_{\mathrm {AMF}}/I_{\mathrm {arc}}$ values, typically below 4 mT/kA. The temporal evolutions of the spot spatial distribution and the associated distribution of the current density were analyzed by processing high-speed video images of the cathode. Various types of distribution depending mainly on current were identified. At low currents (up to 13 kA), the CS distribution covered only a fraction of the cathode surface. At intermediate currents (in 17.2–31.1-kA range), CSs were present on the whole circumference of the cathode and the CS distribution included a closed region without spot. The latter was progressively filled by CSs, yet it totally disappeared before the end of arcing only when its location was off-centered with respect to the cathode axis. At high currents (up to 36.3 kA), the whole cathode surface was occupied by CSs at current peak. The azimuthally averaged radial distribution of the current density was found to be relatively uniform in the regions occupied by CSs. An average spot current of 36.5 ± 2.5 A has been estimated.
27 April 2026 in IEEE Transactions on Plasma Science
Strong negative surface charging events, down to several kilovolt negative, have been observed on past missions in polar Earth orbit (PEO), like Swedish/German spacecraft FREJA or U.S. DMSP missions. Through a set of surface charging simulations performed with the Spacecraft Plasma Interaction Software (SPIS) software, this work attempts to explore parameters, related to space plasma conditions and spacecraft characteristics, and especially, the secondary electron yield of coating materials that may favor such events. Results are compared with previous works on this topic. Also, possible consequences on future commercial satellites in PEO, like constellations, are briefly discussed.
16 February 2026 in IEEE Transactions on Plasma Science
The prediction of adverse effects of geomagnetic storms and energetic radiation (PAGER) project aims to provide a framework for space weather and related effects forecasts. An innovative feature included in PAGER involves integrating an automated process downstream of space weather models to assess both surface and internal charging, enabling the forecasting of spacecraft charging risks for geostationary earth orbit (GEO) and medium earth orbit (MEO). Relying on the versatile electron radiation belt (VERB) code to reproduce the relativistic electron flux spectrum evolution and on spacecraft plasma interaction software-internal charging (SPIS-IC) to deduce the internal charge conduction in sensitive devices from this flux, the PAGER simulation chain is also able to reproduce the electric field evolution over a long period of time in the past and for a given orbit. This simulation chain has been used to reproduce the maximum electric field strength evolution from 2015-08-01T00:00 to 2015-12-01T00:00 in a coaxial cable with Teflon insulation embedded on a spacecraft in GEO. This simulation has been carried out using two different conductivity models. In the first model, the radiation induced conductivity classically depends on the dose rate following a power law, while the second model uses a more refined assumptions of the material, relying on the computation of free charge carriers through a band conductivity description. The evolution of the electric field was compared with internal electrostatic discharge events that actually occurred on a satellite. The correspondence between these events and the periods of highest electric field intensity demonstrates the validity of the PAGER modeling chain for internal charging.