28 March 2023 in IEEE Access
Existing railway measurement methods are very difficult to adapt to high-density operating conditions in terms of safety and efficiency. A mobile laser scanning (MLS) system using LiDAR begins to be applied in railway measurement in complex scenarios and helps to detect the condition of rails. This paper presents a novel method to extract rails from MLS point cloud data. After the point cloud preprocessing, a spatial distance threshold is first set to obtain the point cloud of the ballast bed part. Then, the multi-scale features of the point cloud dimension are defined, and the dimensional features of each point cloud at different scales are calculated as feature inputs using principal component analysis. Finally, a classifier is constructed using linear discriminant analysis to extract the rail point clouds. The results of several scenarios in existing lines show that our method is highly adaptable and the extracted rail completeness and accuracy are above 94%, which is very promising for automatic extraction of rail point clouds from the point cloud data collected by MLS. The gauges measured on the extracted rail point clouds also validate the method as a promising solution for extracting 3D rails from MLS point clouds.
12 April 2021 in E3S Web of Conferences
With the continuous improvement of China's railway construction level, the requirements for the quality of train operation are also improved. For the mixed passenger and freight railway, it is necessary to transit from the simple design concept of safety to the design concept of the unity of comfort and safety. Therefore, modern numerical calculation method or simulation software method is used to replace the traditional quasi-static calculation method, and SIMPACK, ABAQUS and other related software are mainly used to analyze the operation quality and track structure dynamics of the line design scheme. The derailment coefficient, vertical acceleration and other evaluation indexes are used to evaluate the safety and comfort of the line, and the dynamic analysis of the track structure is carried out based on the vertical force. The research shows that under the condition of this line, when the passenger and freight train run at the designed speed per hour in the curve section, they can meet the specification requirements of various indexes, and there is still room for increasing speed, and the stress and strain value of the track structure can meet the specification requirements.