8 November 2021 in IEEE Transactions on Transportation Electrification
Transportation electrification is undergoing a significant transition toward the utilization of efficient and reliable energy sources and smart integration schemes, where this transitioning is continuously facing ever-tightening challenges in order to comply with the increased environmental regulations. Among the different means of transportation, global maritime transport is responsible for 2%–3% of global greenhouse gas (GHG) emissions, and it is predicted to increase to 17% by 2050 if no changes are adapted. Hence, the international maritime organization (IMO) has targeted to reach a 50% reduction in GHG emissions by 2050 compared to 2008. Hence, alternative energy sources shall be utilized in order to meet these strict GHG emissions reduction targets, where battery- and hydrogen-fed fuel cells can play a vital role in such aspects. Since the output of these two energy sources is unregulated dc voltage, their connection to the whole ship power system can be accomplished in several ways, where each way has its features, in addition to utilizing different power conditioning stages (PCSs), and these features are not well clarified and compared in the literature. Hence, this article presents an overview of the possible integration schemes that can be utilized in fuel cell- and battery-fed vessels, which is supported with a comparative assessment. This is also presented along with highlighting the state-of-the-art PCSs that are available in the market and can be utilized in these integration schemes within marine vessels. Such overview and comparative assessment are seen to be of significant importance and added value for researchers and developers in both the academic and industrial sides in order to accelerate the adoption of fuel cells in marine systems for zero-emission shipping.
3 November 2020 in IEEE Transactions on Industry Applications
This paper proposes a novel approach for operating hybrid fuel cell and battery power systems in marine vessels. The target of the approach is to reduce energy losses in drivetrain devices. In the proposed approach, the DC bus voltage of the hybrid power system is adjusted according to fuel cell operating points, which enables operation in Freewheel mode, and thus significantly reducing power conversion losses. Feasibility of the proposed approach is verified using a real-time hardware-in-loop simulation setup consisting of pre-validated virtual models and real industrial power converter controllers. The results presented in the work illustrate that the Variable DC Approach enables significant improvements in drivetrain efficiencies, and thus providing significant savings for vessel operators. Additionally, Variable DC Approach is shown to eliminate high frequency current ripple at the fuel cell terminals, which can further improve the efficiency and the lifetime of the fuel cells.
1 November 2021 in Energy Reports
15 December 2021 in International Journal of Electrical and Computer Engineering Research
Previously, the Variable DC approach concept was proposed for operation of hybrid fuel cell and battery powered marine vessels. The concept was shown to provide significant efficiency improvement, and consequently improved hydrogen fuel savings. However, although the general concept and the control of battery DC/DC converter has been detailly described in previous works, the operation of fuel cell DC/DC converter in different Variable DC approach control modes has not been presented. This paper proposes a fuel cell DC/DC converter control system specifically designed for operation in the three Variable DC approach control modes. The functionality of the proposed fuel cell DC/DC converter and the Variable DC approach in general is verified using a hardware-in-loop test setup consisting of virtual power stage models and real converter controllers. The system is shown to function well in both normal operating conditions and various fault conditions.