In-situ high temperature nanoscratching of Si(110) wafer under reduced oxygen condition was carried out for the first time using a Berkovich tip with a ramp load at low and high scratching speeds. Ex-situ Raman spectroscopy and AFM analysis were performed to characterize high pressure phase transformation, nanoscratch topography and nanoscratch hardness. No remnants of high pressure silicon phases were observed along all the nanoscratch residual tracks in high temperature nanoscratching, whereas in room temperature nanoscratching, phase transformation showed a significant dependence on the applied load and scratching speed i.e. the deformed volume inside the nanoscratch made at room temperature was comprised of Si-I, Si-XII and Si-III above different threshold loads at low and high scratching speeds. Further analysis through AFM measurements demonstrated that the scratch hardness and residual scratch morphologies i.e. scratch depth, scratch width and total pile-up heights are greatly affected by the wafer temperature and scratching speed
The active screen plasma technology was used to functionalize carbon fibers and vitreous carbon disks. The plasma treatment conditions were mapped using optical emission spectroscopy and the functionalized surfaces were analyzed using scanning electron microscopy and atomic force microscopy, x-ray photoelectron spectroscopy, and contact angle measurements. A relationship was found between the active species in the plasma and the functional groups attached to the carbon surfaces, which provides valuable information for the optimization of the active screen plasma treatment. Moreover, the surface analyses were repeated over a period of 28 days to study the aging of the functionalized surfaces in air. The hydrophobic recovery was modeled using a surface restructuring theory which revealed a mean lifetime of 3.4 days for the functional groups.