7 January 2019 in IEEE Microwave and Wireless Components Letters
This letter unfolds a digital predistortion (DPD) technique that improves the linearity of limited range mobile front haul links for the contemporary long-term evolution (LTE) and future (5G) networks. In particular, the proposed technique is applied to radio-over-fiber links based on single-mode (SM) vertical cavity surface emitting lasers emitting at 850 nm and standard SM fibers. Both the memory and generalized memory polynomial models are exploited for the predistorter and identified by utilizing indirect learning architecture. The impact of the DPD technique is observed by the link performance improvement in terms of normalized mean square error and adjacent channel power ratio, referring to complete LTE frames of 10 ms occupying 5-MHz bandwidth and having 64-quadrature amplitude modulation format. Furthermore, the effectiveness of the DPD approach, when varying input power levels, is investigated. The experimental results demonstrate the capability of the proposed DPD technique to achieve promising linearization performance.
15 March 2018 in Journal of Lightwave Technology
In view of the realization of short and medium range Mobile Front Haul (MFH) connections for present (LTE) and future (5G) cellular networks, a cost effective, low consumption Radio over Fiber system is proposed, based on 850 nm Single Mode Vertical Cavity Surface Emitting Lasers (VCSELs) and Standard Single Mode Fibers (SSMFs). An efficient countermeasure to possible impairments due to the bi-modal behavior of SSMFs at 850 nm allows even in critical cases to maintain at high level the quality of the received signal. The performances are evaluated with reference to the Physical Downlink Shared Channel of an entire LTE frame with 20 MHz bandwidth centered in band 20 of the standard. In terms of Error Vector Magnitude and outage probability under temperature stress the system is able to transmit 256-QAM signals in compliance with the LTE standard, which corresponds to a raw data rate transmission of 134.4 Mbit/s, up to distances of 1.5 Km.
12 July 2018 in IEEE Journal of Quantum Electronics
The phenomenon of modal noise, which is typically undesired within fiber optic links, is exploited advantageously to characterize vertical cavity surface emitting lasers (VCSELs) operating in the first optical window (wavelength λ ≃ 850 nm), in terms of frequency chirping. The proposed method, which can be applied utilizing ordinary laboratory components and instrumentation, contributes to fill an existing gap. Indeed, the methods which are typically exploited to determine this undesired optical frequency modulation can be straightforwardly applied only to sources operating at wavelengths of 1310 and 1550 nm, while they become unpractical or even inapplicable at wavelengths of 850 nm. Through the proposed technique, the evaluation of chirp coefficient M and phase difference ψ between frequency and intensity modulation (or equivalently linewidth enhancement factor α and chirp scaling factor κ) of VCSELs can be performed. This allows the correct design of various types of fiber optic links, making possible to take advantage of these low-cost and low-consumption optical sources.
1 January 2015 in International Journal of Materials, Mechanics and Manufacturing
27 April 2018 in IEEE Transactions on Electron Devices
The intrinsic frequency response of silicon- germanium heterojunction bipolar phototransistors (HPTs) at 850 nm is studied to be implemented in multimode fiber systems. The experimental analysis of an HPT with an optical window size of 10 × 10 μm 2 is presented. An opto-microwave (OM) scanning near-field optical microscopy is performed to observe the variation of the HPT dynamic behavior versus the illumination location of the phototransistor. The photocurrent generated by the photodiode at the interface between the n ++ subcollector and the p± guard ring is analyzed, and its impact on the performance of the HPT is investigated. Then, we propose a technique to remove the substrate photocurrent effect on the optical transition frequency (f Topt ): fTopt value of 4.1 GHz given by raw measurement results increases up to 6 GHz after removing the substrate response. The influence of the 2-D carrier flows on the HPT intrinsic OM behavior is also studied. Design aspects of SiGe/Si HPT structures are finally discussed as a conclusion.
1 December 2009 in International Journal of Microwave and Wireless Technologies
This paper presents measurement results providing the mapping of the opto-microwave transfer function performed on an SiGe microwave heterojunction phototransistor (HPT). This measurements will be used to extract a guideline for designing phototransistors. A mapping of the HPT's gain in low frequency helps to estimate the shape of the optical beam used for the measurement. The study also focuses on the cutoff frequency mapping of the device in phototransistor mode. Finally, these results are used to determine the general optimization rules in the SiGe HPTs design.