19 January 2023 in Advanced Science
High‐performance multilayer dielectric elastomer actuators (DEAs) are well‐positioned to overcome the insufficient output force and energy density as artificial muscles. However, due to the fabrication process, the multilayer DEAs with nonmodifiable structures often suffer from the limitation of short lifespans and scalable preparation. Herein, reusable multilayer DEAs with the detachable and reconfigurable structure are fabricated. This is achieved by realizing scalable compliant electrodes using the continuous spatial confining forced network assembly (CSNA) method and combining the vacuum lamination (VL) approach to have good attachability and detachability with the VHB dielectric elastomer. The flexible roller‐based CSNA method is used to prepare the large area compliant electrodes composed ofα,ω‐dihydroxy polydimethylsiloxane and electrically conductive nanoparticles. The fabricated electrodes can continuously work over 10 000 cycles at 40% strained stretching and maintain smooth surfaces to construct multilayer DEAs. Moreover, owing to the detachable configuration of the DEAs, the electrodes can also be recovered and reused for building new actuators. The lower limb assistive device is demonstrated by detachable multilayer spring roll DEAs, achieving approximately 3.1 degrees of flexion and extension movement of knee models under a voltage of 7 kV. The detachable and reconfigurable multilayer DEAs shed new light on the applications of wearable assistive devices.
29 August 2026 in Composites Science and Technology
25 March 2026 in SSRN Electronic Journal
Stretchable strain sensors are pivotal for emerging human-machine interfaces and active rehabilitation. Carbon-based nanocomposites hold considerable potential for strain sensors due to their tunable electrical conductivity and mechanical flexibility. However, majority of them typically suffer from a trade-off between robustness and sensing performance. Herein, we report a screen-printed strain sensor based on an optimized ternary carbon nanocomposite, in which the hybrid conductive architecture establishes synergistic conductive networks that enable stable and efficient strain transduction under large deformation. As a result, the sensor simultaneously achieves a wide sensing range (up to 200% strain), low hysteresis (4.48%), rapid response time (80 ms) with good sensitivity (gauge factor of 2.5), and excellent cyclic durability. The strain sensors are integrated into a smart glove system that enables real-time wireless control of a robotic hand. When deployed on a lower-limb rehabilitation platform, the sensing signals can be decoded by a deep-learning model for motion-intent prediction in active rehabilitation. This work demonstrates a scalable screen-printing manufacturing strategy combined with tailored ternary carbon nanocomposite architectures, providing a practical route toward high-performance stretchable strain sensors for wearable human-machine interaction.