5 January 2018 in IEEE Transactions on Antennas and Propagation
A low-profile metasurface based dipole antenna is proposed, analyzed, and implemented for the wideband operation with improved gain. The metasurface is suspended by separating it from the ground plane with an air gap, and positioning it right beneath a horizontally oriented dipole. The wide operating bandwidth is attributed to the simultaneous excitation of the transverse electric (TE) surface wave resonance of the suspended metasurface and the adjacent metasurface-based dipole resonance. The small propagation constant of transverse magnetic (TM) surface wave in the operating band enlarges the suspended metasurface aperture along the dipole direction for higher gain compared to a conventional low-profile antenna. The proposed antenna design with an overall thickness of 0.07 λ(λ is the wavelength in free-space at the center operating frequency) shows the realized boresight gain of 8.5–11.5 dBi over |S11|≤-10 dB impedance bandwidth of 33.6% (or 4.15 GHz ~ 5.85 GHz).
26 July 2021 in IEEE Transactions on Antennas and Propagation
A double-layer metasurface is proposed to realize the low profile of a broadband dual-polarized antenna for cellular base-station applications. The proposed metasurface is formed by the two layers of printed metallic patch unit cells on either sub-strate surface to miniaturize the metasurface size and enhance de-sign flexibility by regulating the extent of electromagnetic coupling between the two layers. Despite the low profile of the antenna, a wideband operation is accomplished by operating the metasurface in the non-resonant region that facilitates wideband phase-com-pensation and its truncation to a finite dimension with an addi-tional transverse electric (TE) surface wave resonance. The guide-lines for the design of the surface is derived from a comparison of unit cell structures and an approach is introduced to correlate their potential with surface susceptibility parameters. A detailed parametric study addresses the critical concern on the overall di-mensions of the finite metasurface. A ±45° polarized dipole an-tenna with an overall thickness of 0.15λ0 (λ0 is the wavelength in free-space at the center operating frequency) is designed as exam-ple. The measured results show a |S11|≤ -10dB impedance band-width of 46.4% over the frequency range of 1.69-2.71 GHz with average boresight gain of 9 dBi with a ground plane of 1.1 λ0 × 1.1 λ0, well covering 2G (1.71-1.92 GHz), 3G (1.88-2.17 GHz) and LTE (2.3-2.4 GHz and 2.5-2.69 GHz) bands.
27 January 2025 in IEEE Transactions on Electromagnetic Compatibility
This article introduces an innovative calibratable modeling approach to effectively capture intricate arc behavior in air electrostatic discharge (ESD). The proposed method incorporates a compact electric arc resistance model rooted in the Rompe–Weizel law, calibrating by a physics informed neural network (PINN). The systematic uncertainties in the air discharge behavior due to environmental factors and measurement procedure are succinctly and effectively quantified through introducing an equivalent arc length in the compact model. A dedicated electrostatic air discharge behavior library is developed by a reduced-order partial element equivalent circuit model for training the neural network. The PINN calibrates the arc model according to the measured discharge currents on a standard ESD calibration set. The fidelity of the calibrated compact electric arc model is verified by the simulation and measurement. The efficacy of the proposed approach is observed through a case study. This new environment-aware modeling method provides deeper insights into air discharge phenomena and proves its promising potential in characterizing noncontact electromagnetic discharge.