31 July 2024 in Journal of Electromagnetic Engineering and Science
In this paper, we propose an all-metal Vivaldi array antenna with dual-slant polarization for high-power jammer systems. The single Vivaldi element of the proposed array consists of radiating flares and an inner cavity to achieve high directivity and wide-frequency band impedance-matching characteristics. We expanded the proposed Vivaldi element to a 4 × 4 array antenna with dual-slant polarization considering the occurrence of grating lobes. The fabricated array antenna produced measured active voltage standing wave ratios below 2.74:1 (Port 1) and 2.85:1 (Port 6) in the frequency range of 2.5–5.5 GHz for all steering angles. In addition, the measured array gain is above 9.5 dBi in the frequency range from 2 GHz to 6 GHz. These results confirm that the proposed array antenna consisting of metallic components for high durability is suitable for application to high-power jammers.
31 January 2026 in The Journal of Korean Institute of Electromagnetic Engineering and Science
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
1 January 2025 in International Journal of RF and Microwave Computer-Aided Engineering
This study proposes a novel wideband filtering Gysel power divider with a simple structure that exhibits improved passband and stopband performances, and we derive the entire design formulas. This power divider can be easily designed using these derived equations without iterative optimization. Moreover, the stepwise design procedures are described, and the advantages are compared with those of the existing structure. The wideband Gysel power divider is designed, fabricated, and used for measurements. The measured results showed 57% in‐band fractional bandwidth, −3.89 dB insertion loss, and −13.4 dB minimum isolation. Meanwhile, the out‐band fractional bandwidth is confirmed to be 69.5%. Harmonic suppression and isolation at 2f 0 are measured to be 46 dBc and −64 dB, respectively. The selectivity was measured to be about 20 dB at a frequency 1GHz away from the higher frequency of the passband. An analysis of the measured data allows us to demonstrate the validity of our proposed structure and derived design formulas.