10 January 2023 in Journal of Cleaner Production
1 November 2006 in Applied Surface Science
27 April 1998 in Applied Physics Letters
Second-harmonic generation (SHG) has been applied to study the influence of defects in short-period strained-layer superlattices. With a misfit stacking fault defect density of shown by transmission electron microscopy, it is found that the SH intensity increases by about one order of magnitude from that of the defect-free samples. We propose that the inhomogeneous strain field around the fault planes in the superlattice layers is responsible for this abrupt increase of SHG. The expected symmetry and the magnitude of the nonlinear susceptibility from these stacking fault defects are shown to be in agreement with the experimental observations.
1 September 2005 in Journal of the Optical Society of America B
We prepared the composite films by pulsed-laser deposition technique. The films were grown on MgO (100) substrates under a nitrogen pressure of 10.0 Pa at 600°C, and a parallel electric field was applied on the substrate during growth. The chemical natures of Ag in the films were measured by x-ray photoelectron spectroscopy. The linear optical properties of the films were studied in the wavelength range of 330 to 700 nm. The third-order nonlinear optical susceptibilities of the films were determined by z-scan method at the wavelength of 532 nm with a laser duration of 10 ns. The figure of merit (FOM) was order of magnitude larger than that of the films that were grown without an electric field and reached . Our experimental results have demonstrated that an external electrical field can induce the metal-particle orientation in order and therefore enhances the FOM of the metal-dielectric composite films.
1 January 2018 in Forest Products Journal
Formaldehyde-based resin and petroleum-based plastic are often used as an adhesive in plywood manufacturing, which has an adverse effect on people's health and the global environment. We have investigated the plywoodlike composite with wood veneer (WV) and poly-β-hydroxybutyrate film (PHBF) as a novel formaldehyde-free and environmentally friendly composite (WV-PHBF). The composite was prepared with three veneers, and the PHBF placed between adjacent veneers varied from 22.5 to 112.5 g/m2. The composite was hot pressed at 170°C for 70 s/mm under a pressure of 1.0 MPa. Furthermore, the WV-PHBF with an adhesive dosage at 67.5 g/m2 was modified with three modification methods: silane coupling agent (KH-550), alkaline solution (NaOH), and polydiphenylmethane diisocyanate (p-MDI). Results showed the following: (1) under the untreated condition, a composite with more than 67.5 g/m2 adhesive will meet the Chinese National Standard (GB/T) 9846-2015 of bonding and bending strength requirements, and 90.0 g/m2 was the best; (2) the KH-550 and p-MDI treatment had a positive effect on WV-PHBF, but NaOH mainly had an adverse effect; (3) the physical–mechanical properties of the composite with 67.5 g/m2 adhesive content being processed by 1 percent by weight (wt%) KH-550 or 2 wt% p-MDI was better than WV-PHBF with 90 g/m2 adhesive content, especially in bonding strength; (4) statistical analysis shows that 1.0 wt% KH-550 significantly improved the bonding strength properties of WV-PHBF, and water-resistance properties were significantly improved by 2.0 wt% of p-MDI also; and (5) morphological observation shows that KH-550 and p-MDI treatments increase the interfacial compatibility between WV and PHBF of the composites.
2 February 2017 in BioResources
The Properties of Particleboard Made from Alkaline-treated Wheat Straw and Methylene Diphenyl Diisocyanate Binder