9 February 2021 in IEEE Transactions on Transportation Electrification
The electromagnetic suspension-type maglev train can reach ultrahigh-speed using long stator linear synchronous motors; however, slot effect makes the motors suffer from suspension force ripple, since it causes the nonsinusoidal airgap magnetic field distribution. It has been expounded that the suspension electromagnet system is highly nonlinear and unstable in open loops. Additionally, maglev trains experience disturbances and uncertainties in service. Therefore, the robust disturbance-rejection control for electromagnet suspension system is highly necessary to maintain a constant airgap position. In this article, it is intended to propose a novel robust controller for suspension systems which ensures superior system performances despite suspension force ripple, disturbances, and uncertainties while sustaining stable suspension despite system nonlinearity. First, field harmonics are investigated along with slot effects, and an improved nonlinear mathematical model of electromagnetic force is derived. Second, the controller based on the improved force model is formulated. Then, the performance of the designed controller is evaluated on a maglev suspension system with disturbances and uncertainties. Simulation and hardware-in-the-loop experimental results demonstrate that the improved suspension force model is more accurate than the conventional models, and the corresponding controller excels in attenuating larger disturbance without sacrificing tracking performances at different speeds.
16 June 2020 in IEEE Transactions on Magnetics
Electromagnetic-suspension (EMS)-type maglev, based on long stator linear synchronous motor (LSLSM), suffers from the flux linkage and thrust ripple. This is due to the non-sinusoidal airgap magnetic field distribution caused by the slot effect and end effect. In this article, it is intended to address this issue by establishing a nonlinear mathematical model of LSLSM for real-time simulation and controller design, considering the spatial harmonics and core saturation. The Euler–Lagrange (EL) model is improved by means of coenergy and then applied to obtain the general equations of LSLSM. At first, the variation in coenergy in LSLSM regarding the mover position and stator current are analyzed, in the presence of spatial harmonics and core saturation. Afterward, an analytical model of coenergy is constructed by two Fourier basis vectors of mover position and torque angle, and a coefficient matrix polynomial of stator current magnitude. Then, a new model of LSLSM is derived based on the coenergy model and EL method. The parameters of the model can be obtained from the numerical data of coenergy in all operation ranges via finite-element analysis (FEA). Finally, the new model of LSLSM and its propulsion system are integrated in MATLAB/Simulink setup. The simulation results show that the improved EL model can achieve satisfactory accuracy compared with the FEA results well, whereas the computational efficiency is improved largely.
13 September 2018 in Transportation systems and technology
With the advantages of high speed, low noise and high efficiency, the electromagnetic suspension (EMS) type maglev train has a good prospect in railway transportation. It is based on the long stator linear synchronous motor (LSLSM). However, due to cogging effect, end effect and the harmonics in the stator current and flux density distribution around the air-gap, the thrust generated by the LSLSM fluctuates. The thrust ripple brings noise, drop of control accuracy, even causes the resonance of train. In this paper, the thrust ripple produced by the cogging effect and flux linkage harmonics is analyzed. Then a method of harmonic current injection is proposed to compensate cogging force and reduce the thrust ripple, without influence the decoupling control of traction and suspension system. The injected current harmonics are controlled under multiple rotating reference frames independently. Finally, based on voltage equations of harmonics, the decoupled harmonic current controllers with harmonic voltage feedforward are designed, which improve the performance of current harmonics response and thrust ripple suppression. Simulation results on Simulink verify the effectiveness of proposed thrust ripple suppression method for LSLSM.