23 October 2017 in IEEE Transactions on Vehicular Technology
This study proposes a novel method for estimating driveline torques for a vehicle with a dual-clutch transmission (DCT). Knowledge of the driveline torque states, such as the torque transmitted through a clutch, and transmission output torque, allows a significant improvement in powertrain control performance, especially during gear shifts and vehicle launch. Furthermore, vehicles with DCT or automatic transmission whose gear shift processes involve clutch-to-clutch shifts require information about the individual clutch torques for sophisticated torque transfer control. Thus, an adaptive torque observer, which is applicable to DCT drivelines, is developed to estimate the torque transmitted through each clutch and output shaft simultaneously. In order to overcome the lack of measurements in a production car, the proposed observer uses multiple adaptation laws in accordance with driving conditions so that it treats parameter uncertainties effectively, such as those of the clutch friction coefficient, nominal engine torque as well as vehicle load torque. Also, the observer is characterized by its simple and intuitive structure based on a reduced-order driveline model. The estimation performance of the observer including its robustness to the parameter errors is evaluated not only by simulations but also by experiments under various driving scenarios.
15 January 2018 in IEEE/ASME Transactions on Mechatronics
This paper considers the problem of designing an engagement controller for a clutch actuator system having self-energizing mechanism. Since such a system includes torque amplification mechanism, parametric uncertainties in the model may lead to large erroneous results in the clutch torque controller. To compensate this undesirable effect, adaptive sliding mode control is applied based on the actuator position tracking. Estimations of the disk friction coefficient and actuator motion parameters are employed to control the engagement torque properly. The disk friction coefficient adaptation provides online stiffness inference for the engagement force while in contact. Moreover, the unstructured disturbance is also compensated by a disturbance observer. Experimental verifications show the improved performance of the developed control method.
9 November 2016 in IEEE Transactions on Control Systems Technology
Using an adaptive sliding mode control scheme based on the dual clutch torque observer, this brief proposes a novel strategy to control the clutch engagement for the dual clutch transmission (DCT) equipped with the self-energizing clutch actuator. The contribution of this brief is twofold. A sliding mode tracking controller for the actuator motor position is developed by using the information provided by the torque observer designed to estimate the torque transferred through each clutch of the DCT. Then, the adaptive strategy to actively alter the target position command to compensate for the model uncertainty or disturbance is proposed. The actuator position tracking control accuracy improvement attained by using the adaptive sliding mode controller and, most crucially, the ability for the integrated controller to cope with the system disturbance are verified in an integrated manner via actual experiments using the driveline test bench.
14 August 2023 in IEEE Transactions on Intelligent Vehicles
Since the vehicle's response according to the driver's gas pedal operation varies greatly depending on the driving mode, the selection of the driving mode significantly affects the driver's satisfaction. This paper presents a satisfactory driving mode classification that enhances the driver's satisfaction by providing a suitable driving mode to the driver. Unlike the conventional algorithm based on driving style recognition, the proposed approach determines the changes required for the current driving mode, such as mode-up, -stay, -down. Features suitable for classification are extracted from the driver's pedal operation characteristics during specific situations, such as launch, acceleration while driving. The performance of the proposed algorithm is evaluated through nested cross-validation, compared with conventional algorithms based on driving style recognition, demonstrating its superiority, generality. The proposed algorithm is event-based, operates in real-time while driving. As a result, it provides a more reliable, effective solution for enhancing driver satisfaction by providing an appropriate driving mode.